Accu-Cable 3-Pin DMX Pro Production Grade Cable, 05 ft

The AC3PDMXPRO5 Accu-Cable is a 5-foot long 3-Pin Pro DMX Cable from American DJ. This cable is useful for short DMX runs when daisy chaining units together. It uses 3-pin XLR connectors, which should not be confused with standard audio cables. Used for linking lighting effects to control them in DMX or Primary/Secondary modes.

This is the Pro version that features pro grade rubber jacket and prevents kinking at the connectors and extend the life of the cable. The connectors are heavy duty and more durable than the connectors on the non-pro cables, which makes these cables suitable for use on set or location.

FEATURES

• 5-foot (1.52 m) 3-pin DMX Cable
• Color ring on tips to indicate length. Red= 5 ft
• Pro Series DMX Cables
• Heavy duty connectors that are corrosion resistant
• Pro grade rubber jacket
• No memory rugged cable
• Ideal for productions companines
• Includes shrink wrap to allow you to personalize your cable

SPECIFICATIONS

• Wire Gauge 22 AWG
• Conductor Capacitance 12.8 pF/ft at 1 kHz
• Conductor DC Resistance 24 Ohms/ft (Up to 1000' / 304.80 m)
• Shield DC Resistance 3.4 Ohms/ft (Up to 1000' / 304.80 m)
• Nominal Impedance 110 Ohms
• Attenuation 0.6 dB @ 1 MHz
• Connector 1: 3-Pin XLR Male
• Connector 2: 3-Pin XLR Female
• Conductor Material Tinned Copper
• Jacket Type Polyvinyl Chloride (PVC)
• Insulation Type Polyethylene
• Bend Radius 3.2" / 8.1 cm
• Maximum Pull Tension 72 lb / 33 kg
• Operating Temperature -22 to 167°F / -30 to 75°C
• Weight 0.3 lb / 0.1 kg