Light Source, The

The Light Source Threaded Rod Hanger for the Mega-Batten Clamp is a 1 inch by 1.25 inch by 3 inch tall machined aircraft grade aluminum body with a .5 inch by .75 inch socket shoulder bolt to connect...

The Light Source 1/2 inch Slot Tent Beam Clamp fits smaller tent free-span tent beams with a one-half inch slot in the bottom the tent beams. The Tent Beam Clamp is designed to be used on diagonal...

This adapter by the Light Source, allows you to use readily available 1/2" steel water pipe to make custom length hanging adapters. The square shape allows you to tighten these to the pipe with a...

The Light Source Threaded Rod Track Hanger in Black. Designed to work with 1/2" threaded rod.Weight: 0.36 lbsFinish: Black

The Light Source Mega-Truss Pick is CNC machined from solid 1" x 6" 6061 T-6 aluminum billet. Two pockets cut into the Mega-Truss Pick have coupler style aluminum pivoting links, half inch swivel...

The 5/8" Bolted Truss to Pipe Adapter by the Light Source, easily allows joining a pipe to the end of a 5/8" bolted truss. Simply bolt the adapter to the truss with a 5/8" bolt and thread on a 1-1/2"...

The Light Souce's Center Point Genie Fork Adapter 21.5 slides over Genie forks and provides a secure center hang point to rig speakers or truss to the Genie lift or Super Tower. Locking square head...

The Light Souce's Center Point Genie Fork Adapter 23.63 slides over Genie forks and provides a secure center hang point to rig speakers or truss to the Genie lift or Super Tower. Locking square head...

The extremely low profile Chain Pole Clamp clamps securely to 2.375" to 7"OD tent poles utilizing many contact points to maximize its grip while the 6061T-6 aluminum link design minimizes potential...

The Light Source Chain Pole Clamp Extension extends the grip range of the Chain Pole Clamp by 7" diameter out to 14"diameter. The Chain Pole Clamp Extension installs easily with just one quick...

The Light Source Jaw Set 2 inch for fastening the Mega-Beam Clamp on up to 2" thick beam flanges. CNC milled from 6061T-6 aluminum billet. Can be field exchanged with the standard jaws with just hand...

The Light Source M-140 Carrier is self guiding with the flanged wheel design. The rollers are made of Delrin, an engineered plastic with excellent properties for use as bearings. The steel axle is...

The Light Source M140 Track Stop for M140 Track. Two CNC machined 1/4" x 1" aluminum flat bars with contours that match the curvature of the M140 Curtain Carrier, so as not to damage the carrier...

The Light Source M-140 Master Carrier is self guiding with the flanged wheel design. The 4 rollers are made of Delrin, an engineered plastic with excellent properties for use as bearings. The steel...

The Light Source M 140 Track Splice is made of two 1/4" x 1" x 3-1/2" aluminum bars designed to fit into the upper 'I' of the walk along style tracks. The rear splice bar is drilled and tapped at...

The Light Source Wall Hanging Bracket for single M140 Track, with two 9/16" holes for mounting to wall. Four 3/8 inch bolt holes are used to mount the included track hanger short 9 inches off of the...

The Light Source Wall Hanging Bracket for single M140 Track, with two 9/16" holes for mounting to wall. Four 3/8 inch bolt holes are used to mount the included track hanger 16 inches off of the wall...

The Light Source Mega-Airwall Hanger 4" will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the hanger giving a total of 8 inches of metal...

The Light Source Mega-Airwall Hanger 7" will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the hanger giving a total of 14 inches of...

The Light Source Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of the Light Source clamps with 1/2" mounting threads. The Mega-Baby Pin...

The Light Source Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of the Light Source clamps with 3/8" mounting threads. The Mega-Baby Pin...

The Light Source Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of the Light Source clamps with 3/8" mounting threads. The Mega-Baby Pin...

The two-piece, Light Source Mega Batten Clamp is great way to hang 1-1/2" pipe. The tight compression fit keeps pipe from rotating within the clamp. The Mega Batten Clamp wraps around the pipe batten...

The Mega-Beam Clamp by Light Source, is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 16" model has a 3 ton rating. The two aircraft...

The Mega-Beam Clamp by Light Source, is a low profile sliding jaw design that allows you to secure your load as close to the I-Beam as possible. The 16" model has a 3 ton rating. The two aircraft...

The Light Source Mega-Cable Carrier gives you a channel to drop your cables into above the batten or grid. The Mega-Cable Carrier has a 1/2" mounting hole and is bolted to a clamp. The assembly is...

The world's standard theatrical lighting c clamp, the Light Source Mega-Clamp, is created from high tensile, aircraft grade, extruded aluminum. The Mega-Clamp's 600 pound design load is...

The standard for hanging intelligent lighting fixtures. Allows one man to hang heavy or awkward intelligent fixtures. Simply flip the link up, place clamp over the pipe and the Mega-Claw holds the...

The standard for hanging intelligent lighting fixtures. Allows one man to hang heavy or awkward intelligent fixtures. Simply flip the link up, place clamp over the pipe and the Mega-Claw holds the...

The ingenious handy pocket wrench to focus lights. Sturdy, yet small enough to fits on your keychain, and you get to choose your color. The Light Source Mega-Combo Wrench has a 1/2" and 5/16" hex...

The Light Source Mega-Coupler has solid wing nut tabs that are stronger than regular steel wing nuts. The grade 8 Hex Head Cap Screw locks securely into the hex milled pocket so that the nylock nut...

The Light Source Mega-Coupler has solid wing nut tabs that are stronger than regular steel wing nuts. The grade 8 Hex Head Cap Screw locks securely into the hex milled pocket so that the nylock nut...

TheLight Source Mega-Coupler Pipe Adapter can be used to rig pipe mounted plasma screens, projectors and speakers from overhead pipe or truss. The Pipe to Coupler Adapter attaches a standard threaded...

TheLight Source Mega-Coupler Pipe Adapter can be used to rig pipe mounted plasma screens, projectors and speakers from overhead pipe or truss. The Pipe to Coupler Adapter attaches a standard threaded...

The LightSource Mega-Coupler with Eye Nut has a Forged Steel Eye Nut for making rigging connections from a pipe or truss. The Forged Eye Nut is secured to the Mega-Coupler with a 1/2" flathead socket...

The LightSource Mega-Coupler with Eye Nut has a Forged Steel Eye Nut for making rigging connections from a pipe or truss. The Forged Eye Nut is secured to the Mega-Coupler with a 1/2" flathead socket...

The Light Source Mega-Drop Down is a quick and inexpensive way to place a light fixture below the pipe or grid. It now has new wrench flats for easy placement of wrenches for adjustments.The...

The Light Source Mega-Drop Down is a quick and inexpensive way to place a light fixture below the pipe or grid. It now has new wrench flats for easy placement of wrenches for adjustments.The...

The Light Source Mega-Drop Down is a quick and inexpensive way to place a light fixture below the pipe or grid. It now has new wrench flats for easy placement of wrenches for adjustments.The...

The Light Source Mega-Drop Down is a quick and inexpensive way to place a light fixture below the pipe or grid. It now has new wrench flats for easy placement of wrenches for adjustments.The...