B-Stock Martin Ether2DMX8 Artnet to DMX Router

SPECIFICATIONS

PHYSICAL

• Length: 11.4 in. (288 mm)
• Width: 19.0 in., 19-inch rackmount (482.2 mm)
• Height: 1.8 in., 1U (43.6 mm)
• Weight: 8.0 lbs. (3.6 kg)

CONTROL/USER INTERFACE

• Front panel display with 4-button control menu
• 1 x dual-color LED per port
• Mouse & keyboard input
• Remote web access
• DMX viewer for any physical incoming or outgoing DMX port

HARDWARE

• 520 MHz processor for fast DMX output
• Ethernet
  • Art-Net-compliant, Art-Net II-compliant
  • ACN-ready
  • Built-in webpage for quick access and remote setup
  • 10/100 Mbit connection
• 8 ports
  • Configurable as input or output
  • Opto-isolated circuit for each port
  • User-definable DMX timings for each port
  • Each port set as output can be set to constantly repeat the last received DMX frame, or only to output new frames
  • RDM-ready
  • Dual-color LED for each port
• 8 open-contact inputs
  • Inputs transmit Art-Net-compatible contact closures on the network
  • Contact closures can trigger factory and user presets and start cue playback

SOFTWARE

• 10 user presets for device configuration
• M-Series, Maxedia use preset with auto-IP address setting
• Presets for DMX Hub and Splitter functionality
• Mergeable setup where multiple inputs are routed in LTP, HTP to one output
• Ports assignable to input or output
• Ports routable to/from internal ports or to/from any DMX universe on Art-Net
• Port routing triggerable by contact closure through the use of user presets
• DMX channel ranges of ports configurable
• Merger modules routable between inputs and outputs and/or Art-Net universes
• Channel ranges can be put in LTP/HTP, copy or fixed value from other channels
• Auto or manual IP addressing
• Tracking backup function: automatic handover to another Art-Net signal if one Art-Net signal fails
• DMX and Art-Net test pattern generator
• Art-Net broadcast and unicast compatible
• Configuration files loadable/storable on USB memory sticks
• Firmware upload via USB memory stick

CONSTRUCTION

• Housing: Steel and aluminum
• Finish: Electrostatic powder-coated

INSTALLATION

• 19-inch rackmount (1U)

CONNECTIONS

• 10/100 base-T ethernet port: Neutrik locking RJ45 Ethercon socket
• DMX in/out ports: 8 x 5-pin female XLR
• Backup, software upload: USB
• AC power input: 3-pin IEC male socket
• AC power throughput: 3-pin IEC female socket

ELECTRICAL

• AC power: Auto-ranging 100 - 240 VAC nominal, 50/60 Hz
• Main fuse: 2 x 500 mA T (slow-blow)

TYPICAL POWER AND CURRENT

• 100 V, 60 Hz: 220 mA
• Measurements made at nominal voltage. Allow for a deviation of +/- 10%.