Curtain Track & Hardware

The Light Source M140 Track Stop for M140 Track. Two CNC machined 1/4" x 1" aluminum flat bars with contours that match the curvature of the M140 Curtain Carrier, so as not to damage the carrier wheel . The rear bar is threaded for a 5/16" socket head...

The Light Source M-140 Carrier is self guiding with the flanged wheel design. The rollers are made of Delrin, an engineered plastic with excellent properties for use as bearings. The steel axle is machined to a 30 micron finish for smooth rolling under...

The LightSource Mega-Track Hanger, Long, makes it easy to hang 140 or 300 series track onto pipe grids, or from individual pipes. The Mega-Track Hanger Long hangs from the upper pipe of the grid and has an offset length from the track to the pipe the...

Threaded Rod Mega-Track Hanger Long. Pre-drilled for 1/2" threaded rod connects M140 track to a 1/2" threaded rod while allowing for fine tuning the vertical installed height of the track. This "Threaded Rod Mega-Track Hanger Long" uses a shorter section...

The Light Source Threaded Rod Track Hanger in Black. Designed to work with 1/2" threaded rod.Weight: 0.36 lbsFinish: Black

The LightSource Mega-Track Hanger, Short makes it easy to hang 140 or 300 series track onto pipe grids, or from individual pipes. The Mega-Track Hanger Short hangs from the lower pipe of the grid and secures the track just 3/16 of an inch below the grid...

The Light Source M-140 Carrier is self guiding with the flanged wheel design. The rollers are made of Delrin, an engineered plastic with excellent properties for use as bearings. The steel axle is machined to a 30 micron finish for smooth rolling under...

The Light Source M 140 Track Splice is made of two 1/4" x 1" x 3-1/2" aluminum bars designed to fit into the upper 'I' of the walk along style tracks. The rear splice bar is drilled and tapped at the factory, so no nuts or wrenches are required for...

The Light Source M140 Track Stop for M140 Track. Two CNC machined 1/4" x 1" aluminum flat bars with contours that match the curvature of the M140 Curtain Carrier, so as not to damage the carrier wheel . The rear bar is threaded for a 5/16" socket head...