ETC

ETC's Response Mk2 Eight-Port Gateway provides data distribution using the quality and reliability of ETC’s network technology. Built using industry-standard sACN, DMX, and RDM, the Response...

ETC RJ45 DATA Accessory Kit (Contains W6538, W6539 and N4086) To use Source 4WRD II fixtures with XLR connectors, you can use RJ45-to-XLR adapter cables or an RJ45-to-XLR adapter that attaches to the...

An ETCpad Office Dock for the ETCpad. Big spaces require big control. Technical staff at your facility can use ETCpad tablets to configure and control connected systems. Accessories like the ETCpad...

An ETCpad VESA Dock for the ETCpad. Big spaces require big control. Technical staff at your facility can use ETCpad tablets to configure and control connected systems. Accessories like the ETCpad...

ETCpad shoulder strap. NOTE: ETCpad tablet is NOT included. Some images includes a ETCpad tablet for illustration purposes only. NOTE: FROM VARIOUS MANUFACTURERS. Product may vary slightly from...

ETCpad hand strap (replacement). NOTE: ETCpad tablet is NOT included. Some images includes a ETCpad tablet for illustration purposes only. NOTE: FROM VARIOUS MANUFACTURERS. Product may vary slightly...

The ETC relay module is a dual, plug-in mechanical relay assembly for use in both Sensor®+ and Unison® Dimming Series modular dimmer rack enclosures. each relay module provides two...

ETC Tinnerman clip, used in several places for Source Four and Source Four Junior. 

ETC part number HW8144-1 Handle, Yoke, Knob, T-Handle, 5/16-15, White This is for ONE T-Handle for Source Four Jr/Standard Ellipsoidals, Par, PaeNel, and MultiPARs

ETC Machine Rivet 3/16 x 5/16, Black Zinc

ETC HW748 Compression Spring, CO720-072. Used in the lamp burner assembly in Source Four fixtures.

ETC HW747 Washer, Wave

ETC HW6122 Rubber Bumper, Table top Resting Feet for Source Four fixtures.

Replacement stippled/wave lens for the ETC Source Four PARnel fixture. DETAILS MPN: 7061A4010-1 Position the luminaire with the front of the unit facing you, and tilted slightly down. With the...

Replacement clear/wave lens for the ETC Source Four PARnel fixture. DETAILS MPN: 7061A4010-2 With the wave side of the lens facing toward the front of the luminaire, install the clear/wave lens...

New – This item is new, but from older stock. May be in older worn packaging. U-Bolt Mounting Kit with washers and nut for 2-Port TNode. Manufacturer ETC Model # UBOLT Part # 4105K1003 Weight:...

The ETC Response 0-10V Gateway accepts streaming ACN (sACN) and DMX control input to provide 24 outputs of 0–10 V control. It is ideal for both retrofit and new power control system installations...

ETC's Response Mk2 Eight-Port Gateway provides data distribution using the quality and reliability of ETC’s network technology. Built using industry-standard sACN, DMX, and RDM, the Response...

ETC's Response Mk2 Eight-Port Gateway provides data distribution using the quality and reliability of ETC’s network technology. Built using industry-standard sACN, DMX, and RDM, the Response...

The ETC Unision Foundry Relay Controller offers DMX controlled fully-rated 20 A relays to switch lighting loads on and off. The Relay Controller mounts to an electrical junction box...

The ETC ColorSource Spot V is an LED luminaire crafted by lighting experts with a proven history of quality spot fixtures, ColorSource Spot V brings a richness of color, increased brightness, and...

ETC Source Four Par NSP Lens. New flat style introduced by ETC in August of 2020. ETC Source Four Par lenses are made from heat resistant, borosilicate glass. With five different beam spreads...

ETC Source Four Par NSP Lens. New flat style introduced by ETC in August of 2020. ETC Source Four Par lenses are made from heat resistant, borosilicate glass. With five different beam spreads...

ETC Source Four Par WFL Lens. New flat style introduced by ETC in August of 2020. ETC Source Four Par lenses are made from heat resistant, borosilicate glass. With five different beam spreads...

ETC Source Four Par MFL Lens. New flat style introduced by ETC in August of 2020. ETC Source Four Par lenses are made from heat resistant, borosilicate glass. With five different beam spreads...

ETC Source Four Par Yoke Bracket for the S4 Par

ETC Source Four Ellipsoidal Yoke Bracket for S4 fixtures.

This is a cast iron C-clamp made by ETC with a powder coated white finish. When open, the jaw size is 1 7/8". ETC model number 400-CC-1 (White) ETC part number 7060A2009-1

Using ETC’s Electronic Silent* (ES) technology and a convection cooled design, this high-performance dimmer can be used with any 750W or less tungsten fixture. By taking DMX control signals...

ETC UFD 600W 120V DMX Dimmer

The Target Key 10 (TK 10) button accessory brings the power of Apex Target Keys in a portable form factor for exceptional control on any Eos Family device. The USB-connected bank has ten buttons with...

The Target Key 10 (TK 10) button accessory brings the power of Apex Target Keys in a portable form factor for exceptional control on any Eos Family device. The USB-connected bank has ten buttons with...

An LED luminaire crafted by lighting experts with a proven history of quality fixtures, the ETC ColorSource Fresnel V MAX doubles the output of the existing ColorSource Fresnel V but still brings a...

The ETC ColorSource PAR V Zoom is an LED luminaire crafted by lighting experts with a proven history of quality. The manual zoom eliminates the need for additional diffusion and lets you change...

As its name suggests, the ETC ColorSource PAR jr is a compact version of the much-loved ColorSource PAR. Crafted by lighting experts, PAR jr uses a four-color array of red, green, blue and lime to...

ETC's Response Mk2 Four-Port Gateway provides data distribution using the quality and reliability of ETC's network technology. Built for Net3 using industry-standard sACN, DMX and RDM, the Response...

FEATURES Multi-port DMX splitter with DMX-in and DMX-thru Optically isolated DMX512 ports Supports Remote Device Management (RDM) Protocol DIN rail and rack-mount versions Power and DMX presence...

LV Power Supplies The ETC BluesSystem LV power supplies provide precision power and control for BlueBeam and BlueDome fixtures. Available in a one-zone and six-zone version (up to 10 luminaires per...

Peli-style Case with foam for Ion Element 2 The iSeries of waterproof cases are the perfect solution for storing and transporting your delicate electronics, microphones, mixers, cables, video, and...

The ETC S4LED-SWD10 is a smooth wash diffuser in a 10" black gel frame that is for Source Four LED fixtures and creates a smooth field pattern. NOTE: This lens is not sized for use in...