ETC ETCnomad Base Key - 1,024 outputs

Full-featured PC- and Mac-based lighting control application for use with conventional and moving lights, media servers and LED luminaires. An ETCnomad can be used with Eos sofware application, in a primary, backup, client or offline environment. To output to a lighting rig, the Eos software requires use of the ETCnomad key. When connected as a client, an ETCnomad lighting controller accesses the full output capacity of the connected system. Without the key, ETCnomad software operates offline only.

Optional fader wings, programming wings, X-keys and compatibility with USB–MIDI panels allow extended and customizable control.

FEATURES

• 1,024 outputs
• Computer-based lighting control software; compatible with Windows 7, Windows 8 and Macintosh OS X Mavericks
• ETCnomad lighting controllers can operate in a stand-alone, primary/backup and/or client environment
• When an ETCnomad lighting controller is connected as a client, output capacity is determined by the system it is connected to
• Can run both Eos/Element and Cobalt software
• Net3/ACN/sACN and Artnet Ethernet lighting protocols
  • Note: Net2/EDMX protocol is not supported
• DMX/RDM via ETC Gadget or Gadget 2
• DMX/RDM via Net3 DMX/RDM Gateways
• RFR, iRFR and aRFR supported
• OSC Transmit/Receive
• UDP Transmit/Receive

WHAT'S INCLUDED

• USB key

ETCnomad lighting control software is available for download from etcconnect.com/Products/Consoles/Eos-Family/ETCnomad-ETCnomad-Puck/ETCnomad.aspx

COMPATIBILITY

• Eos Programming Wing
• Eos Motorized Fader Wing 10 or 20
• Eos Fader Wing 20 or 40
• ETC Gadget II USB-to-DMX/RDM converter (up to four may be connected for a total of four local outputs)
• ETCpad
• aRFR/iRFR remote controls
• Alpha-numeric keyboard
• USB mouse

IMPORTANT ETCNOMAD LIGHTING CONTROLLER ORDERING INFORMATION

A single universe of output may be distributed using an ETC Gadget or Gadget 2 USB to DMX/RDM converter. Up to four gadgets are supported. Additional or all outputs may be distributed via Ethernet protocols directly (Net3/ACN/sACN, or ArtNet) or by compatible Ethernetdistribution hardware, such as Net3 DMX/RDM Gateways. The Gadget and/or network equipment must be purchased separately from the ETCnomad Lighting Control kit.

NOTE: The ETCnomad lighting controller does not support ETCNet2/EDMX protocols.

NOTE: Eos software 2.8.X or below unlocks the base dongle at 512 outputs. Eos software 2.9 or higher unlocks the base dongle to 1,024 outputs.

NOTE: ETCNomad is also compatible with Cobalt and Hog4. Cobalt software is not compatible with macOS 10.15.1 (Catalina) or later.