ETC

ETC Desire D40XT Lustr+ LED Par IP66, Black

Write a Review
MPN:
7410A1005-0X
Availability:
This item is shipped directly from the vendor and is subject to their availability.
Type:
Par
Source:
LED
IP-Rating:
IP66
  • ETC Desire D40XT Lustr right view
  • ETC Desire D40XT side view with optional yoke with floor stand
$2,015.00

Description

ETC’s Desire Series D40XT puts the seven-color x7 system into a round theatrical wash light fully sealed and rated for IP66 outdoor use. The x7 Color System produces the widest range of spectrally-balanced saturated and tinted color choices available. The D40XT offers a rugged die-cast enclosure, noiseless fan-free operation, multiple lens options and advanced user interface. Its watertight construction makes it ideal for outdoor events and installations.

The Desire D40XT Lustr+ LED array combines seven colors optimized with high-intensity white LEDs to create an ideal theatrical wash fixture. Full range color, with an emphasis on lighter colors and white. Lustr+ is the most flexible array, providing a full range of color possibilities, from adjustable whites and subtle tints to vibrant, bold colors sure to make an impact.

What does XT mean? The XT stands for exterior. This fixture has an IP66 rating for temporary applications indoors or outdoors. ETC designed every aspect of the D40XT fixture to be waterproof and withstand heat, cold, rain and snow. (Not to be confused with ETC's XTI fixtures that have a rating for permanent installations indoor or outdoor.)

FEATURES

  • A waterproof fixture body with an IP66-rating for temporary outdoor use
  • Bright, even when wet
  • Forty LEDs
  • Ideal brightness and size for events 
  • Noiseless convection cooling - no fans
  • Multiple lens options
  • Easy to use interface

ETC'S SELADOR DESIRE LED ARRAY OPTIONS (sold separately, not interchangeable)

  • Lustr+: Optimized array with six colors plus high-intensity white LEDs to create an ideal theatrical wash fixture.
    Full range color, with an emphasis on lighter colors and white
  • Vivid: The x7 Color System array is balanced for use as a high-intensity, high-saturation color-changing wash fixture
  • Studio HD: Combines warm white and cool white LEDs for variable white color temperature mixing. Added to this are five colors from the Selador x7 Color System to fill in the white LED spectral gaps, providing the richest variable-white light possible in an LED fixture
  • Studio Daylight: Contains 5600 K LEDs for high-intensity, non-variable cool-white output
  • Studio Tungsten: Contains 3000 K LEDs for high-intensity, non-variable warm-white output

WHAT'S INCLUDED

  • Hanging yoke
  • Attached leads equipped with watertight Molex power connectors and watertight DMX connectors

SPECIFICATIONS

SOURCE

  • LED details: 40 Lumileds LUXEON® Rebel LED
  • Max lumens: 2,593
  • Lumens per watt: 25.2
  • L70 rating (hours to 70% output): 50,000 hours*
    • All LED sources experience some lessening of light output and some color shift over time.

COLOR

  • Colors used: Red, amber, green, cyan, blue, indigo, white
  • Color temperature range: Color mixing fixture
  • Calibrated array: Yes
  • Red shift: Yes

OPTICAL

  • Beam angle: 22°
    • Note: Secondary lenses available for multiple beam-spread options
  • Aperture size: 7.5 in. (190.5 mm)
  • Pattern projection: No
  • Camera flicker control/Hz range: 900–25,000 Hz

CONTROL

  • Input method: DMX512 via watertight 5-pin XLR
  • Protocols: DMX-512, RDM
  • Modes (footprint):
  • RDM configuration: Yes
  • UI type: LCD
  • Local control: Yes
  • Onboard presets: Yes
  • Onboard sequences: Yes
  • Onboard effects: No
  • Fixture-to-fixture control: Yes
  • Note: 15-bit virtual dimming engine

ELECTRICAL

  • Voltage range: 100–240 VAC 50/60 Hz
  • Input method: watertight Molex connectors, 39 in and thru, requires power from non-dim source
  • Inrush (over first half-cycle): 15 A at 120 V, 40 A at 240 V
  • Fixtures per circuit: 9 (15 A power thru connector), 10 (R20 module or similar)
  • Wattage typical: 110
  • Current draw: 1 A at 120 V, 0.5 A at 240 V

THERMAL

  • Ambient operating temp: -20°–40° C (-4°–104° F)
  • Fan (controllable): No (N/A)
  • Droop compensation: Yes
  • dB range: N/A
  • BTUs/hour: 375.32

PHYSICAL

  • Materials: Die-cast, all metal housing
  • Exterior housing color: Black
  • Mounting options: Yoke
  • IP rating: IP66 for exterior wet location use
  • Weight: 14 lb (6.4 kg)
  • Height: 14.8 in. (375 mm) without c-clamp
  • Width: 10.6 in. (270 mm)
  • Depth: 10.4 in. (265 mm)
  • Note: Easy access for secondary lenses and standard 7.5 in. PAR acessories

INCLUDED ITEMS

  • Hanging yoke
  • Attached leads equipped with watertight Molex power connectors and watertight DMX connectors

WARRANTY

  • Fixture 5 years
  • LED array 10 years

REGULATORY AND COMPLIANCE

  • cETLus Listed
  • Conforms to UL1598
  • Certified to CSA C22.2 No. 250.0
  • CE Compliant

OPTIONAL ACCESSORIES

  • Safety cable
  • Color frame (7.5 in x 7.5 in.) for use with round and oblong lenses
  • Multiple lens options
  • Top Hat
  • Yoke with floor stand attachment
  • W6437 XT Outdoor UL 5 ft Molex to Molex Extension
View AllClose

Related Products

ETC Desire D22 Lustr right view ETC Desire D22 Lustr back view
Add to Cart
Quick view

ETC Desire D22 Lustr+ LED Par, Black

ETC

$1,052.00
ETC’s Selador Desire D22 luminaire puts the x7 Color System into a compact, round washlight. Highly efficient primary lenses and careful color choices make the D22 fixture ideal for stage, studio,...
ETC Desire D40 Lustr right view ETC Desire D40 Lustr back view
Add to Cart
Quick view

ETC Desire D40 Lustr+ LED Par, Black

ETC

$1,892.00
The ETC Desire D40 fixture puts the seven-color x7 system into a round theatrical washlight. Highly efficient primary lenses and careful color choices make the D40 fixture ideal for stage, studio and...