ETC

ETC Desire D40XTI Studio HD VW LED Par IP66, Black

Write a Review
MPN:
7410A1102
Availability:
This item is shipped directly from the vendor and is subject to their availability.
Type:
Par
Source:
LED
IP-Rating:
IP66
  • ETC Desire D40XTI Studio HD right view
  • ETC Desire D40XTI Studio HD side view
$1,778.00

Description

The Selador Desire D40XTI brings the amazing control of the seven-color x7 Color System to your permanent application. With its IP66 rating, this fixture is ready for installation inside or outside – wherever you need it. The x7 Color System produces the widest range of spectrally balanced saturated and tinted color choices available. The D40XTI offers a rugged die-cast enclosure, noiseless fan-free operation, and multiple lens options that can be changed on-site.

The Desire D40XTI Studio HD Variable White combines an equal number of warm white and cool white LEDs for variable color temperature mixing. Adds five additional x7 LED colors to fill the white LED spectral gaps. Provides the richest variable white light possible in an LED luminaire .

What does XTI mean? The XT stands for exterior and the I stands for install. This fixture has an IP66 rating for permanent applications inside or outside. ETC designed every aspect of the D40XTI fixture to be waterproof and withstand heat, cold, rain and snow. (Not to be confused with ETC's XT fixtures that have a lower rating for temporary applications inside or outside.)

FEATURES

  • A waterproof fixture body with an IP66-rating for permanent indoor or long-term outdoor use
  • Bright, even when wet
  • Forty LEDs
  • Ideal brightness and size for events 
  • Noiseless convection cooling - no fans
  • Multiple lens options
  • Easy to use interface

ETC'S SELADOR DESIRE LED ARRAY OPTIONS (sold separately, not interchangeable)

  • Lustr+: Optimized array with six colors plus high-intensity white LEDs to create an ideal theatrical wash fixture. Full range color, with an emphasis on lighter colors and white
  • Vivid: The x7 Color System array is balanced for use as a high-intensity, high-saturation color-changing wash fixture
  • Studio HD: Combines warm white and cool white LEDs for variable white color temperature mixing. Added to this are five colors from the Selador x7 Color System to fill in the white LED spectral gaps, providing the richest variable-white light possible in an LED fixture
  • Studio Daylight: Contains 5600 K LEDs for high-intensity, non-variable cool-white output
  • Studio Tungsten: Contains 3000 K LEDs for high-intensity, non-variable warm-white output

WHAT'S INCLUDED

  • Hanging yoke
  • Attached 6 ft (1.8 m) power and DMX leads
  • Data termination board
  • Accessory ring for installation of secondary lenses

SPECIFICATIONS

SOURCE

  • LED details: 40 Lumileds LUXEON® Rebel LED
  • Max lumens: 3,194
  • Lumens per watt: 33.2
  • L70 rating (hours to 70% output): 50,000 hours*
    • *All LED sources experience some lessening of light output and some color shift over time.

COLOR

  • Colors used: Red, amber, green/cyan, blue, warm white, cool white
  • Color temperature range: 3000 - 5600 K
  • Calibrated array: Yes
  • Red shift: Yes

OPTICAL

  • Primary Field angle: 17°
  • Beam angle: 8°
    • Note: Secondary lenses available for multiple beam-spread options
  • Aperture size: 7.5 in. (190.5 mm)
  • Pattern projection: No
  • Camera flicker control/Hz range: 900–25,000 Hz

CONTROL

  • Input method: DMX512 via termination board
  • Protocols: DMX-512, RDM
  • Modes (footprint):
  • RDM configuration: Yes
  • UI type: None
  • Local control: No
  • Onboard presets: Yes
  • Onboard sequences: Yes
  • Onboard effects: No
  • Fixture-to-fixture control: No
  • Note: 15-bit virtual dimming engine

ELECTRICAL

  • Voltage range: 100–240 VAC 50/60 Hz
  • Input method: Waterproof, 72 in. power lead, requires power from non-dimmable source
  • Inrush (over first half-cycle): 15 A at 120 V, 40 A at 240 V
  • Fixtures per circuit: 9 (15 A power thru connector), 10 (R20 module or similar)
  • Wattage typical: 110
  • Current draw: 1 A at 120 V, 0.5 A at 240 V

THERMAL

  • Ambient operating temp: -20°–40° C (-4°–104° F)
  • Fan (controllable): No (N/A)
  • Droop compensation: Yes
  • dB range: N/A
  • BTUs/hour: 375.32

PHYSICAL

  • Materials: Die-cast, all metal housing
  • Exterior housing color: Black
  • Mounting options: Yoke, single-pole mount, wall or square pole mount, twin fixture pole mount
  • IP rating: IP66 for exterior, wet location use
  • Power cable diameter: 0.36 in.
  • Data cable diameter: 0.34 in.
  • Weight: 15 lb (6.8 kg)
  • Height: 14.65 in. (372 mm) without c-clamp
  • Width: 10.72 in. (272 mm)
  • Depth: 10.25 in. (260 mm)
  • Note: Effective projected area (EPA): 0.74

INCLUDED ITEMS

  • Hanging yoke
  • Attached 6 ft (1.8 m) power and DMX leads
  • Data termination board
  • Accessory ring for installation of secondary lenses

WARRANTY

  • Fixture 5 years
  • LED array 10 years

REGULATORY AND COMPLIANCE

  • cETLus Listed
  • Conforms to UL1598
  • Certified to CSA C22.2 No. 250.0
  • CE Compliant

OPTIONAL ACCESSORIES

  • Safety cable
  • Wall-mount kit
  • Single pole-mount kit
  • Douple pole-mount kit
  • Multiple lens options
  • Top Hat
  • Yoke with floor stand attachment
View AllClose

Related Products