ETC

ETC Desire D60XTI Studio Tungsten 3000K LED Par IP66, Black

Write a Review
MPN:
7410A1206
Availability:
This item is shipped directly from the vendor and is subject to their availability.
Type:
Par
Source:
LED
IP-Rating:
IP66
  • ETC Desire D60XTI Studio Tungsten right view
  • ETC Desire D60XTI back view
$2,568.00

Description

ETC’s Desire Series D60XTI brings the amazing control of the x7 color System™ and the long throw of a D60 to your facility for permanent installation. With its IP66 rating, this luminaire is ready for mounting inside or outside- whereever you need it. The Selador® x7 color system produces the widest range of spectrally-balanced saturated and tinted colour choices available. The D60XTI offers a rugged die-cast enclosure, noiseless fan-free operation and multiple lens options that can be changed on site.

The Desire D60XTI Studio Tungsten LED array creates warm white light that mimics the performance of tungsten fixtures. This array contains 3000K LEDs for high-intensity, non-variable warm-white output. They look great in person and on camera.

What does XTI mean? The XT stands for exterior and the I stands for install. This fixture has an IP66 rating for permanent applications inside or outside. ETC designed every aspect of the D60XTI fixture to be waterproof and withstand heat, cold, rain and snow. (Not to be confused with ETC's XT fixtures that have a lower rating for temporary applications inside or outside.)

FEATURES

  • Easy setup via any RDM device, such as ETC Gateways and Gadget
  • 60 LED high intensity LED emitters
  • IP66-rated for exterior wet-location use
  • Data termination board for easy installation (included)

ETC'S SELADOR DESIRE LED ARRAY OPTIONS (sold separately, not interchangeable)

  • Lustr+: Optimized array with six colors plus high-intensity white LEDs to create an ideal theatrical wash fixture. Full range color, with an emphasis on lighter colors and white
  • Vivid: The x7 Color System array is balanced for use as a high-intensity, high-saturation color-changing wash fixture
  • Studio HD: Combines warm white and cool white LEDs for variable white color temperature mixing. Added to this are five colors from the Selador x7 Color System to fill in the white LED spectral gaps, providing a rich variable-white light
  • Studio Daylight: Contains 5600 K LEDs for high-intensity, non-variable cool-white output
  • Studio Tungsten: Contains 3000 K LEDs for high-intensity, non-variable warm-white output

WHAT'S INCLUDED

  • Hanging yoke
  • Accessory ring for installation of secondary lenses
  • Attached 5 ft (1.5 m) power cable, DMX in/out cable
  • Data termination board

SPECIFICATIONS

SOURCE

  • LED details: 60 Lumileds LUXEON® Rebel ES LED
  • Max lumens: 6,482
  • Lumens per watt: 43.2
  • L70 rating (hours to 70% output): 50,000 hours*
    • *All LED sources experience some lessening of light output and some color shift over time.

COLOR

  • Colors used: Warm white
  • Color temperature range: 3200 K
  • Calibrated array: No
  • Red shift: No

OPTICAL

  • Field angel: 18°
  • Beam angle: 8°
    • Note: Secondary lenses available for multiple beam-spread options
    • Lenses may be installed permanently in the luminaires at the factory as a special order
  • Aperture size: Accessory ring for installation of secondary lenses [9 in. (228.6 mm)]
  • Pattern projection: No
  • Camera flicker control/Hz range: 900–25,000 Hz

CONTROL

  • Input method: DMX512 via termination board
  • Protocols: DMX-512, RDM
  • Modes (footprint):
  • RDM configuration: Yes
  • UI type: None
  • Local control: No
  • Onboard presets: Yes
  • Onboard sequences: No
  • Onboard effects: No
  • Fixture-to-fixture control: Yes
  • Note: 15-bit virtual dimming engine

ELECTRICAL

  • Voltage range: 100–240 VAC 50/60 Hz
  • Input method: Waterproof, 72” outdoor power lead , requires power from non-dim source
  • Inrush (over first half-cycle): 46 A at 120 V, 77 A at 240 V
  • Fixtures per circuit: 9 (15 A power thru connector), 10 (R20 module or similar)
  • Wattage typical: 124
  • Current draw: 1 A

THERMAL

  • Ambient operating temp: -20°–40° C (-4°–104° F)
  • Fan (controllable): No (No)
  • Droop compensation: Yes
  • dB range: N/A
  • BTUs/hour: 423.088

PHYSICAL

  • Materials: Die-cast, all metal housing
  • Exterior housing color: Black
  • Mounting options: Yoke
  • IP rating: IP66 for exterior wet-location
  • Weight: 23 lb (10.43 kg)
  • Heigh: 14.21 in. (361 mm) without c-clamp
  • Width: 12.15 in. (309 mm)
  • Depth: 11.30 in. (287 mm)

INCLUDED ITEMS

  • Hanging yoke
  • Accessory ring for installation of secondary lenses
  • Attached 5 ft (1.5 m) power cable, DMX in/out cable and
  • Data termination board

WARRANTY

  • Fixture 5 years
  • LED array 10 years

REGULATORY AND COMPLIANCE

  • cETLus Listed
  • Conforms to UL1598
  • Certified to CSA C22.2 No. 250.0
  • CE Compliant

OPTIONAL ACCESSORIES

  • Safety cable
  • Color frame (9 in. x 9 in.) for use with round and oblong lenses
  • Multiple lens options
  • Top Hat
  • Yoke with floor stand attachment
  • powerCON to PowerCON fixture to fixture jumper cable
View AllClose

Related Products