ETC
ETC Eos Programming Wing/ETCnomad Unlocked Bundle
- MPN:
- 4240A1037-US
- Availability:
- This item is shipped directly from the vendor and is subject to their availability.
Description
Eos Programming Wing is a facepanel remote for ETCnomad (either PC or Mac). Combine the hand-on features of the Eos Programming Wing with the full functions of the ETCnomad with 6,144 outputs.
The ETnomad is a f ull-featured PC- and Mac-based lighting control application for use with conventional and moving lights, media servers and LED luminaires. An ETCnomad can be used with Eos sofware application, in a primary, backup, client or offline environment.
The ETC Eos Programming Wing provides a portable home-base for the programmer on the move. The wing uses the familiar Gio and Gio@5 keyboard layout, so you can get to work immediately – no need to hunt for keys. With the Programming Wing, you get the freedom of mobile programming without missing out on control features. Each wing includes playback controls, four parameter encoders, level and rate controls as well as DMX512-A/RDM outputs. It is compact enough move from room to room in a venue or to take on the road.
It cannot be used on any ETC hardware that has a dedicated facepanel and connected devices must be running Windows 7 or higher or Mac OSX El Capitan (10.11) or later. The Eos Programming Wing is not compatible with Windows XP or earlier Microsoft operating systems. The wing provides power sensing and automatically turns on when both an active USB data connection and mains power is provided via the external 12V power supply.
ETCnomad FEATURES
- 6,144 outputs
- Computer-based lighting control software; compatible with Windows 7, Windows 8 and Macintosh OS X Mavericks
- ETCnomad lighting controllers can operate in a stand-alone, primary/backup and/or client environment
- When an ETCnomad lighting controller is connected as a client, output capacity is determined by the system it is connected to
- Net3/ACN/sACN and Artnet Ethernet lighting protocols
- Note: Net2/EDMX protocol is not supported
- DMX/RDM via ETC Gadget or Gadget 2
- DMX/RDM via Net3 DMX/RDM Gateways
EOS PROGRAMMING WING FEATURES
- Same keypad layout as Gio
- Backlit keys
- Master Fader Pair
- Four DMX512/RDM ports
- Contact Closure Trigger
- Two Powered USB ports for connectivity
- One USB port to store and secure an ETCnomad Dongle
- One Littlite connection
- VESA 100x100mm mountable
- Provides a Kensington Lock compatible locking point
WHAT'S INCLUDED
- ETCnomad USB key
- Eos Programming Wing
- Power supply
- IEC power cord
- USB cable
SPECIFICATIONS
EOS PROGRAMING WING:
INTERFACES
- AC Input (100 - 240 VAC at 50/60Hz) with external power supply
- Four DMX512/RDM ports
- Three USB ports
- Contact Closure Trigger
PHYSICAL
- Weight: 10.0 lb (4.5 kg)
- Height: 4.04 in. (103 mm)
- Width: 19.55 in. (497 mm)
- Depth: 14.24 in. (362 mm)
ETCnomad MINIMUM HARDWARE REQUIREMENTS
Windows minimum requirements- Multi-core processor with clock frequency higher than 2.0 GHz
- Windows 7 or higher
- > 1 GB free disk space
- Screen resolution of at least 1280x1024
- > 2 GB of RAM
- 64 MB video card
- RJ-45 Ethernet network adapter (required to communicate with a lighting network, DMX output devices)
- USB ports for connection of Nomad dongle, accessories
- Multi-core processor with clock frequency higher than 2.0 GHz (2.5 GHz for 6,144)
- OS X Mojave (10.14) or later
- >1 GB free disk space
- Screen resolution of at least 1280x1024
- >2 GB of RAM
- 64 MB Video Card
- RJ-45 Ethernet network adapter (required to communicate with a lighting network, DMX output devices)
- USB ports for connection of Nomad dongle, accessories
Related Products
ETC Eos Programming Wing/ETCnomad Base Bundle
ETC
ETC Eos Programming Wing
ETC
ETC Ion Xe or Eos Programming Wing Flight Case
ETC
ETC ETCnomad Base Key - 1,024 outputs
ETC
ETC Eos Motorized Fader Wing, 10 Fader
ETC
ETC Eos Motorized Fader Wing, 20 Fader
ETC
ETC Eos Standard Fader Wing, 20 Fader
ETC
ETC Eos Standard Fader Wing, 40 Fader
ETC
ETC ETCnomad 5K Output After Market Upgrade
ETC