ETC

ETC Source 4WRD II Tungsten Gallery LED Retrofit, Black

Write a Review
MPN:
7067A1114
Availability:
This item is shipped directly from the vendor and is subject to their availability.
Type:
4WRD
IP-Rating:
IP20
  • ETC Source 4WRD II
  • ETC Source 4WRD back view
  • ETC Source 4WRD back angled view
  • ETC Source 4WRD top view with optional fixture body
  • ETC Source 4WRD side view with optional fixture body
  • ETC Source 4WRD front view with optional fixture body
  • ETC Source 4WRD mounting post
$680.00

Description

Source 4WRD II (Watt Reduction Device) Tungsten Gallery is a replacement for a standard Source Four burner assembly that converts the HPL source to a white-light LED and provides a significant reduction in power consumption. The simple and quick upgrade is non-destructive and takes less than a minute. In most cases it can even be done without breaking the fixture’s focus. The Source 4WRD II is theatrically dimmable via DMX or line dimmable, with a traditional LED curve, to allow flexibility for your installation. And, because it is an LED source, your fixtures will run cool and efficiently without lamp replacements.

Source 4WRD II Tungsten Gallery offers a warm white at 3200K with a high 90+ CRI rating for museum, retail or marketing events where color fidelity is paramount.

FEATURES

  • Easy LED retrofit for any full size Source Four Ellipsodial incandescent fixture
  • Keep your fixtures while upgrading to LED technology
  • Brighter then nearly all traditional HPL lamps
  • DMX in and thru via RJ45
  • 12 built-in color presets
  • 5 built-in sequences including stand-alone operation

WHAT'S INCLUDED

  • Source 4WRD mounting post
  • 3 ft (1 m) power lead with Edison plug

Source 4WRD II LED ARRAY OPTIONS (sold separately)

  • Tungsten (3200K with 80+ CRI for maximum output)
  • Tungsten Gallery (3200K with 90+ CRI)
  • Daylight Gallery (5900K with 90+ CRI)

SPECIFICATIONS

SOURCE

  • LED details: S4WRD II LED
  • Max lumens: 9,716
  • Lumens per watt: 64.8
  • L70 rating (hours to 70% output): >45,000 hours*
    • *All LED sources experience some lessening of light output and some color shift over time.

COLOR

  • Colors used: Warm white
  • Color temperature range: 3200K
  • CRI: 90+
  • Calibrated array: N/A
  • Red shift: No

OPTICAL

  • Field angle range: Swappable lens tubes between 5–90 degrees
    • Note: Lens tubes sold separately
  • Camera flicker control/Hz range: No, not PWM dimmed

CONTROL

  • Input method: DMX control or line dimmed
  • Protocols: DMX, RDM via RJ45
  • Modes (footprint): 1 Channel (Intensity) for DMX
  • RDM configuration: Yes
  • UI type: 7-segment address display, local level control via UI
  • Local control: Yes
  • Onboard presets: No
  • Onboard sequences: No
  • Onboard effects: No
  • Fixture-to-fixture control: No

ELECTRICAL

  • Voltage range: 114–125 VAC 60 Hz
  • Input method: Hardwired, 1 m cord, Edison plug
  • Inrush (over first half-cycle): 30 A at 120 V, 12 A at 230 V
  • Fixtures per circuit: 14 (120 V, 20 A switched circuit, R20 module or similar)
  • Wattage typical: 150 W at 120 V, 175 W at 230 V
  • Current draw: 1.26 A at 120 V, 0.75 A at 230 V
  • Note:
    • When using line dimming, see the S4WRD manual for dimmer setup.
    • When using line dimming, standby power is 0 W.

THERMAL

  • Ambient operating temp: 5°–50° C (41°–122° F)
  • Fan (controllable): Yes (no)
  • Droop compensation: No
  • dB range: 287 dBa average at 1 m
  • BTUs/hour: 529 at 120 V, 597 at 230 V

PHYSICAL

  • Materials: Die-cast aluminum
  • Exterior housing color: Black
  • IP rating: IP20
  • Weight: 3.73 lb (1.69 kg)
  • Height: 5.59 in. (142 mm)
  • Width: 7.0 in. (178 mm)
  • Depth: 6.29 in. (160 mm)

INCLUDED ITEMS

  • Source 4WRD mounting post
  • 3 ft (1 m) power lead with Edison plug

WARRANTY

  • 3 years

REGULATORY AND COMPLIANCE

  • UL 1573 (complete luminaire)
  • UL 1598C (retrofit kit)
  • CSA C22.2 No. 166 (complete luminaire)
  • CSA TIL B79-A (retrofit kit)
  • CE Compliant

OPTIONAL ACCESSORIES

  • Source Four Ellipsoidal incandescent fixture body with lens tube
  • Source Four PAR fixture body
  • Source Four PARNel fixture body
  • Swappable lens tubes between 5–90 degrees
  • RJ45 cables
View AllClose