ETC
ETC Source Four LED 2 Tungsten HD Complete Fixture, White
- MPN:
- 7461A1061-A
- Condition:
- Used
- Availability:
- Usually ships within 2 business days when in stock.
Description
Used – Good: The item was a demo unit us here at Monkey Wrench Productions. The item is in good condition and is fully-functional but shows signs of wear from use. It may have markings and minor cosmetic damage. Includes original factory packaging. It may be missing parts, accessories, or instructions.
The ETC Source Four LED Series 2 luminaires feature the same size, look, optics and beam angles as a conventional Source Four fixture, with the efficiency and energy savings of an LED. They also use the same barrel, so you can easily retrofit your inventory. For the highest-quality, controllable beam, Source Four LED Series 2 luminaires can accept any standard Source Four lens tubes, plus a special LED-only 50° lens tube. You can achieve the best results when using a Source Four EDLT (Enhanced Definition Lens Tube), which makes the beam crisper and cleaner.
FEATURES
- Up to nine fixtures (15A max) may be linked via power thru connector (10 fixtures total per circuit) when used with R20 Relay Module or Unison Echo Relay Panel
- Multiple control options, including Direct, RGB, HSIC, and console-free modes
- 15-bit virtual dimming engine for smooth fades and minimal color shift during dimming
- ETL Listed to UL1573; IP20 rated
SPECIFICATIONS
SOURCE
- LED details 60 Lumileds LUXEON® Rebel LED
- Max lumens Series 2 Tungsten HD: 11,512
- Lumens per watt Series 2 Tungsten HD: 55.3
- L70 rating (hours to 70% output) Tungsten HD: >60,000 hours
COLOR
- Colors used Series 2 Tungsten HD: Red, Red-Orange, Mint, Blue, Indigo
- Calibrated array: Yes
- Red shift Yes (can be disabled)
OPTICAL
- Beam angle range: Swappable lens tubes between 5°–90°
- Gate size: 80 mm
- Aperture size: 6.25–14 in (depending on lens tube)
- Pattern projection: Yes
- Pattern size: A or B
- Camera flicker control/Hz range: Yes: 900–25,000 Hz
CONTROL
- Input method: DMX512 via 5-pin XLR
- Protocols: DMX512/RDM
- RDM configuration: Yes
- UI type: LCD
- Local control: Yes
- Onboard presets: Yes
- Onboard sequences: Yes
- Onboard effects: No
- FixtureLink: Yes
- Notes 15-bit virtual dimming engine
ELECTRICAL
- Voltage range: 100–240 VAC 50/60 Hz
- Input method: Neutrik powerCON in and thru, requires power from a non-dimmable source
- Inrush:
- 50 A at 120 V (First half-cycle)
- 107 A at 240 V (First half-cycle)
- Fixtures per circuit:
- 7 Tungsten HD (15 A via power thru connector)
- 8 Tungsten HD (via R20 module or Echo Relay Panel)
- Wattage typical Series 2 Tungsten HD: 208
- Current draw Series 2 Tungsten HD:
- 2.08 A at 120 V
- 0.93 A at 240 V
*All measurements are for 120 V, 60 Hz. Results may vary in different regions.
THERMAL
- Ambient operating temp: 0°–40°C (32°–104°F)
- Fan (controllable): Yes (yes)
- Droop compensation: Yes
- dB range: 22.5 dBA average at 1 m
- BTUs/hour Series 2 Tungsten HD: 709
PHYSICAL
- Materials: Die-cast, all metal housing
- Mounting options: Yoke
- IP rating: IP20
- Height without c-clamp: 17.1 in. (434 mm)
- Width: 13.3 in. (338 mm)
- Depth: 19.8"
- Weight Without barrel: 14.3 lb (6.5 kg)