ETC

ETC Source Four LED Series 2 Lustr, Used

Write a Review
MPN:
7461A1051
Condition:
Used
Availability:
Usually ships within 2 business days when in stock.
Source:
LED
IP-Rating:
IP20
  • ETC Source Four LED Series 2 Lustr
  • ETC Source Four LED Series 2 Lustr with cords
  • ETC Source Four LED Series 2 Lustr controls
  • ETC Source Four LED Series 2 Lustr left
  • ETC Source Four LED Series 2 Lustr back
  • ETC Source Four LED Series 2 Lustr back top
  • ETC Source Four LED Series 2 Lustr right
  • ETC Source Four LED Series 2 Lustr front
$1,595.00

Description

Used – Like New/Demo Unit: This item has been well-cared-for, has undergone limited use, and is still in excellent working condition. It may show limited signs of wear, i.e. small scratches or cosmetic errors. Includes the original packaging from the manufacturer.

ETC Source Four LED Series 2 Lustr - light engine only (without shutter barrel) - Black housing
For use with ETC zoom lens tubes, adapters, and for retrofit of exisiting fixtures

Series 2 light engines work with all Source Four lens tubes to deliver a high-quality, controllable beam of LED light. For the best results, ETC highly recommends that you use EDLT lens tubes. There is a special LED-only version of the 50° lens tube. Combine with available adapters to transform your fixture into a fully functional Fresnel or CYC light.

FEATURES

  • Interacts seamlessly with conventional sources
  • Beautifully illuminates skin tones and other objects for natural appearance and high color rendering
  • Multiple control options, including Direct, RGB, HSIC, and console-free modes
  • 15-bit virtual dimming engine for smooth fades and minimal color shift during dimming
  • With multiple modes and fixture settings including color mixing as ‘hue, saturation, brightness’ or ‘RGB'
  • ETL Listed to UL1573; IP20 rated
  • Combine with available adapters to transform your fixture into a fully functional fresnel or CYC light

REQUIRED ACCESSORIES

  • Fixed field lens tubes
    • 19°, 26°, 36° EDLT (enhanced definition lens tubes)
    • LED-specific 50° EDLT (enhanced definition lens tubes)
    • 5°, 10°, 14°, 70°, 90° (standard lens tubes)

WHAT'S INCLUDED

  • Soft-focus diffuser in an A-size gobo holder
  • Hanging yoke
  • 1.5 m powerCON power-input cable with a connector of choice

SOURCE FOUR LED SERIES ARRAY

  • Lustr - based on the x7 Color System, utilizing seven colors including high-output lime to achieve true, usable broad-spectrum color. Adds lime and more red emitters compared to the Series 1 LED array.

SPECIFICATIONS

SOURCE

  • LED details: 60 Lumileds LUXEON® Rebel LED
  • Max lumens: 11,512
  • Lumens per watt: 52.7
  • L70 rating (hours to 70% output): >60,000 hours*
    • *All LED sources experience some lessening of light output and some color shift over time

COLOR

  • Colors used: Red, red-orange, mint, blue, indigo
  • Color temperature range: 2,700-4,500 K
  • Calibrated array: Yes
  • Red shift: Yes (can be disabled)

OPTICAL

  • Beam angle range: Swappable lens tubes between 5-90 degrees
  • Gate size: n/a (without a shutter barrel)
  • Camera flicker control/Hz range: 900–25,000 Hz
  • Note: Can be used with LED CYC and LED Fresnel adapters

CONTROL

  • Input method: DMX512 via 5-pin XLR connector
  • Protocols: DMX512, RDM
  • Modes (footprint):
  • RDM configuration: Yes
  • UI type: LCD
  • Local control: Yes
  • Onboard presets: Yes
  • Onboard sequences: Yes
  • Onboard effects: No
  • FixtureLink: Yes
  • Note: 15-bit virtual dimming engine

ELECTRICAL

  • Voltage range: 100–240 VAC 50/60 Hz
  • Input method: powerCON power in and thru, requires power from a non-dimmable source
  • Inrush (First half-cycle) : 50 A at 120 V, 107 A at 240 V
  • Fixtures per circuit: 7 fixtures (15 A power thru connector) or 8 fixtures (R20 module or similar)
  • Wattage typical/standby: 208 W at 120 V
  • Current draw typical/standby: 2.08 A at 120 V, 0.93 A at 240 V

THERMAL

  • Ambient operating temp: 0°–40° C (32°–104° F)
  • Fan (controllable): Yes (Yes)
  • Droop compensation: Yes
  • dB range: 22.5 dBA average at 1 m
  • BTUs/hour: 709

PHYSICAL

  • Materials: Die-cast, all metal housing
  • Exterior housing color: Black
  • Mounting options: Yoke
  • IP rating: IP20
  • Weight: 18.3 lbs (8.3 kg) without lens tube
  • Height: 24.2 in (615 mm) without lens tube
  • Width: 13.3 in. (338 mm) without lens tube
  • Depth: 21.6 in. (548 mm) without lens tube

INCLUDED ITEMS

  • Soft-focus diffuser in an A-size gobo holder
  • Hanging yoke
  • 1.5 m powerCON power-input cable with a connector of choice

WARRANTY

  • Fixture 5 years
  • LED array 10 years

REGULATORY AND COMPLIANCE

  • cETLus Listed
  • Conforms to UL 1573 Listed
  • Certified to C22.2 C22.#166
  • CE Compliant

OPTIONAL ACCESSORIES

  • Safety cable
  • Swappable lens tubes between 5-90 degrees
  • Pattern holders (A or B sized)
  • Glass pattern holder
  • Drop-In iris
  • Color frames (size depend on lens tube)
  • Donut (size depend on lens tube)
  • Top hat (size depend on lens tube)
  • Half hat (size depend on lens tube)
  • powerCON to powerCON fixture jumper cable
  • Various diffusers
View AllClose

Related Products