ETC
ETC Source Four LED Series 3 Daylight HDR, Black (No lens tube)
- MPN:
- 7462A1071
- Availability:
- This item is shipped directly from the vendor and is subject to their availability.
- Source:
- LED
- IP-Rating:
- IP20
Description
ETC Source Four LED Series 3 - light engine with XDLT shutter barrel - Black housing
For use with ETC XDLT fixed-field lens tubes
The Source Four LED Series 3 brings the brightess LED fixture to the stage. Hang this fixture in a box boom, overhead, or from the farthest back-of-house position and be amazed at how bright your space is. The deep red LEDs in the Series 3 are essential to accurately capture the life within every shade of skin. It brings a deeper dimension to scenery, and adds warmth to sunsets and firelight. The tunable white-light Daylight HDR array included red, mint, blue, indigo, cyan and deep red LEDs.
Additional features include wireless DMX/RDM through City Theatrical’s Multiverse® protocol, and easy NFC configuration using your mobile device and ETC’s Set Light app. The user interface was designed to make your workflow as efficient as possible. It is intuitive without compromising on features, allowing you to quickly and accurately adjust settings.
The Series 3 light engines work with the new XDLT lens tubes. The XDLT lens tubes offers maximum brightness, especially when used from the farthest distances. Reduced light leak, improved pattern projection, and near-zero chromatic aberration make these lens tubes a must-have for the largest theatres. Added are highly visible lens tube labels for every day convenience.
NOTE: When using the Source Four LED Series 3 with standard and EDLT lens tubes, order light engine and Source Four LED shutter barrel.
FEATURES
- Deep Red LED for richer colors and healthier skin tones
- Wireless setup and control with City Theatrical's Multiverse
- Improved full-color user interface
- New lens tube increase brightness and sharper images
- Enhanced optics for long throw distances
- 15-bit virtual dimming engine for smooth fades and minimal color shift during dimming
- With multiple modes and fixture settings including color mixing as ‘hue, saturation, brightness’ or ‘RGB'
REQUIRED ACCESSORIES
- XDLT fixed field lens tubes
- 5°, 10°, 14°, 19°, 26°, 36°, 50°, 70° XDLT (Ultimate definition lens tubes)
WHAT'S INCLUDED
- Soft-focus diffuser in an A-size gobo holder
- Hanging yoke
- 1.5 m powerCON TRUE1 TOP power-input cable with a connector of choice
SOURCE FOUR LED SERIES 3 ARRAY OPTIONS (sold separately, not interchangeable)
- Lustr X8 - brings a new depth to your colors with soft pastels and brighter whites. Adds the deep red emitters compared to the Series 2 LED array.
- Daylight HDR - produces the widest range of variable white for a customizable white light.
SPECIFICATIONS
SOURCE
- LED details: 90 Lumileds LUXEON® C and CZ
- Max lumens: 14,214
- Lumens per watt: 42
- L70 rating (hours to 70% output): >54,000 hours*
- *All LED sources experience some lessening of light output and some color shift over time
COLOR
- Colors used: Deep red, red, mint, cyan, blue, indigo
- Color temperature range: 1900–10450 K
- Calibrated array: Yes
- Red shift: Yes (selectable)
OPTICAL
- Beam angle range: Swappable lens tubes between 5-90 degrees
- Gate size: 80 mm
- Aperture size: 6.25 - 17.5 in. (depending on lens tube)
- Pattern projection: Yes
- Pattern size: A or B
- Slot for glass or stainless steel patterns and soft focus diffuser
- Wide accessory slot with sliding cover for motorized pattern device or iris
- Camera flicker control/Hz range: 5 kHz, 25 kHz
- Note: Can be used with LED CYC and LED Fresnel adapters
CONTROL
- Input method: DMX512 via 5-pin XLR connector and NFC
- Protocols: DMX512, RDM, City Theatrical Multiverse, NFC
- Modes (footprint): 5 modes (1–12 channels)
- RDM configuration: Yes
- UI type: Full color display
- Local control: Yes
- Onboard presets: Yes (12)
- Onboard sequences: Yes
- Onboard effects: No
- FixtureLink: Yes
- Note: 15-bit virtual dimming engine
ELECTRICAL
- Voltage range: 100–240 VAC 50/60 Hz
- Input method: Neutrik powerCON TRUE1 TOP in
- TRUE1 connector rated for 20 A (120 V / 60 Hz) and 16 A (240 V /50 Hz)
- Inrush (First half-cycle): 40 A at 120 V, 80 A at 230 V
- Fixtures per circuit: 5 (link up to 4 via Power Thru connector)
- Wattage typical/standby: 340 W at 120 V, 330 W at 230 V
- Current draw typical/standby: 2.85 A at 120 V, 1.50 A at 230 V
THERMAL
- Ambient operating temp: 0°–40° C (32°–104° F)
- Fan (controllable): Yes (Yes)
- Droop compensation: Yes
- dB range: 34 dBA average at 1 m
- BTUs/hour: 1,159
PHYSICAL
- Materials: Die-cast, all metal housing
- Exterior housing color: Black
- Mounting options: Yoke
- Positive locking double-clutch fixture body
- IP rating: IP20
- Weight: 19.2 lb (8.71 kg) without lens tube
- Height: 23.65 in (601 mm) without lens tube
- Width: 13.38 in. (340 mm) without lens tube
- Depth: 25.08 in. (637 mm) without lens tube
WARRANTY
- Fixture 5 years
- LED array 10 years
REGULATORY AND COMPLIANCE
- cETLus Listed
- Conforms to UL 1573
- Certified to C22.2 C22.#166
- CE Compliant
OPTIONAL ACCESSORIES
- Safety cable
- Swappable XDLT lens tubes between 5-90 degrees
- Pattern holders (A or B sized)
- Glass pattern holder
- Drop-In iris
- Color frames (size depend on lens tube)
- Donut (size depend on lens tube)
- Top hat (size depend on lens tube)
- Half hat (size depend on lens tube)
- powerCON TRUE1 TOP to powerCON TRUE1 TOP fixture jumper cable
- Various diffusers