Furman CN-1800S 15A 9 Outlets SmartSequencing Power Conditioner

New – Open Box

The Furman CN-1800S is designed for commercial A/V installers, offering advanced AC protection, noise filtration, and the cutting-edge SmartSequencing™ technology by Furman. This allows large A/V systems to power on and off safely with a simple press of a button or turn of a key, even for non-technical users. SmartSequencing ensures synchronized power management across multiple zones from a single control point.

The unit includes robust surge protection, noise filtration for clear audio/video, voltage protection, and diagnostic lights. Equipped with RS-232 ports for remote integration, the CN-1800S delivers 15 amps across nine outlets for dependable performance.

FEATURES

• Surge Protection – Series Multi-Stage Protection (SMP) Technology provides the highest level of surge & spike protection available
• Noise Filtration – Linear Filtration Technology (LiFT) reduces AC noise linearly across a very wide bandwidth for unequaled audio & video clarity
• Voltage Protection – Extreme Voltage Shutdown (EVS) circuity safely powers down itself and connected equipment during unsafe voltage periods
• SmartSequencing™ – SmartSequencing allows bidirectional, safe sequenced power up/down operations via the push of a button or turn of a key 15A SmartSequencing Power Conditioner
• Diagnostic Lights – Diagnostic lights provide valuable system information including power quality, “Protection OK” indicator, and Extreme Voltage indicator
• 15 Amp Output Current – 15 amp maximum current capacity with incorporated 15 amp thermal circuit breaker
• Remote Access (RS-232) – RS-232 compatibility & command set provide integration with control systems, open source and control programming
• Nine Total Outlets – The CN-1800S contains eight rear panel NEMA 5-15R outlets and one front panel NEMA 5-15R outlet

SPECIFICATIONS

• Family: Contractor Series
• Line Voltage: 120 Volts
• AC Receptacles: Rear Panel: 2 Unswitched NEMA 5-15R (1 duplex), 6 Sequenced NEMA 5-15R (3 duplex) Front Panel: 1 NEMA 5-15R Convenience Outlet, Unswitched
• AC Surge Protection: SMP
• Spike Protection Mode: Line to neutral, zero ground leakage
• Spike Clamping Voltage: 188VAC peak @ 6,000 volts/3,000 amps
• Response Time: 1 nanosecond
• Maximum Surge Current: 6,500 Amps
• AC Undervoltage Protection: EVS, 77VAC +/-3VAC
• AC Overvoltage Protection: EVS, 145VAC +/-5VAC
• AC Overvoltage Reset Modes: Manual and Auto-reset (configurable)
• AC Filtering: LiFT
• Noise Attenuation: Linear, 10dB @10KHz, 40dB@100KHz, 50dB@500KHz
• Operating Temperature Range: 5°C (40°F) to 40°C (105°F)
• Humidity Range: <90% rH (Relative Humidity)
• Key-switch: Front panel, 3-position key-switch (On, Off, Remote), keys included (1 pair)
• Push-button Switch: Front panel, hidden by security cover
• Circuit Breaker: Front panel, push-button, 15A Thermal Breaker
• Front Panel Diagnostic Indicators: Primary link, Secondary link, Ethernet, Remote off, Delay 1, Delay 2, Delay 3, Power, Protection OK, Extreme Voltage
• Front Panel DIP Switches: Front panel. Hidden by security cover, 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off BND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
• Potentiometer: Front panel, hidden by security cover, fine tune delay adjust
• Control/Status/Triggering (Rear Panel): Remote Terminal +5-30VDC In, 12VDC (12mA) Out
• SmartSequencing: Phoenix 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop – 1000’ nominal)
• Remote Terminal: Phoenix 4-Pin Connector With Screw Terminals; +12V, STAT, REM, GND (Class 2 Wiring)
• RS-232 Compatible: Yes, DB-9 Connector
• Voltmeter: Available with RS-232, ± 2VAC accuracy
• Ammeter: Available with RS-232, ±1A accuracy
• Power Consumption (No Load): 10 Watts
• Safety Agency: NRTL-C, RoHS Compliant
• Dimensions: 1.75" H x 19" W x 10.5" D
• Weight: 12 lbs (5.4 kg)