Furman CN-20MP Contractor Series 20A MiniPorts

Delivering SmartSequencing outside of the equipment rack, with remote relay.

Furman’s Contractor Series MiniPorts extend the benefits of SmartSequencing to electronics outside of the equipment rack, providing tremendous flexibility to any installation scenario. Units may be daisy-chained and fully controlled via a Furman SmartSequencer, legacy Furman sequencer, third-party sequencers, and/or control and automation systems.

DIP switches and potentiometer allows customization of settings such as sequencing delays, 12V on/off, and more. Security covers are provided to prevent unauthorized personnel from tampering with DIP switches.

Sequencing of duplex initiated remotely by standard analog triggering (remote terminal) or digital link (SmartSequencing from CN-1800S or CN-2400S).

The CN-20MP can shut itself off automatically when triggered by a fire alarm.

FEATURES

• SmartSequencing™ – SmartSequencing allows bidirectional, safe sequenced power up/down operations via the push of a button or turn of a key.
• Voltage Protection – Extreme Voltage Shutdown (EVS) safeguards from catastrophic under-voltage (under 80V sustained) or over-voltage (over 145V sustained) conditions. The EVS feature can be selectively enabled or disabled according to the preference of the user.
• Diagnostic Lights – Diagnostic lights provide valuable system information including power quality.
• 20 Amp Output Current – 20 amp maximum current capacity.
• DIP Switch Customization – DIP switches and potentiometer allows customization of settings such as sequencing delays, 12V on/off, and more. Security covers are provided to prevent unauthorized personnel from tampering with DIP switches.

SPECIFICATIONS

• AC Voltage Input Range: 90-139VAC, 50/60Hz
• Maximum AC Current Rating: 20 Amps
• AC Cord: 3/12AWG, 10 feet, black, fixed, NEMA 5-20P plug
• AC Receptacles: 2 NEMA 5-20R’s (1 duplex)
• Under-Overvoltage Protection:
  • AC Undervoltage Protection: EVS, 77VAC+/-3VAC
  • AC Overvoltage Protection: EVS, 140VAC+/-5VAC
  • EVS Enable/Disable (configurable)
• Operating Temperature Range: 5C (40F) to 40C (105F) degrees
• Humidity Range: <90% rH (Relative Humidity)
• User Interface:
  • Circuit Breaker: No breaker
  • Front panel diagnostic indicators (LED): Power, Extreme Voltage, Primary Link, Secondary Link
  • Side Panel DIP Switches: Side panel. hidden by security cover, 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off GND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
  • Potentiometer: Side panel, hidden by security cover, fine tune delay adjust
• Control/Status/Triggering (Top Panel)
  • Remote Terminal: +5-30VDC In, 12VDC (12mA) Out
  • SmartSequencing: Phoenix 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop - 1000’ nominal)
  • Remote Terminal: Phoenix 5-Pin Connector With Screw Terminals; +12V, STAT, REM, GND, DLY OUT(Class 2 Wiring)
  • Force Off: Phoenix-type 2-Pin Connector With Screw Terminals,
  • FORCE OFF: (Class 2 Wiring)
  • IP Addressability: Optional, via CN-1800S or CN-2400S with BB-RS232 Ethernet/RS-232
  • Adaptor (sold separately) for IP control via Telnet, HTTP, BlueBOLT®
  • Voltmeter: Available via SmartSequencing communication, +/- 2VAC accuracy
  • Ammeter: Available via SmartSequencing communication, +/-1A accuracy
• Power Consumption (No Load): 10 Watts
• Line Voltage: 120 (Volts)
• Safety Agency: CSA
• RoHS Compliant: Yes
• Dimensions: 7.375 x 6.25 x 2.5"
• Weight: 3.75 lbs
• Shipping Dimensions: 11.7 x 9.2 x 4.5"
• Shiping Weight: 5 lbs