Furman PL-8C E 10A 11 Outlets 230V Power Conditioner with Lights

The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world’s most advanced and comprehensive transient voltage surge supressors.

You’ve got a rack for your effects, preamps, tuner…You’re going to plug that into the wall? One big spike and your rig is up in smoke. Furman’s advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman’s advanced Linear Filtering Technology, you’ll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.

FEATURES

• Surge Protection
  • Furman’s exclusive SMP technology provides the highest level of surge & spike protection available.
• Noise Filtration
  • LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity.
• Voltage Protection
  • Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.
• Pull-out Lights
  • Dual smooth track retractable LED lights illuminate equipment in your rack.
• Diagnostic Lights
  • LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.
• Isolated Banks
  • Isolated outlet banks minimize inter-component interference and noise contamination.
• Wall Wart Spacing
  • Three widely spaced outlets accommodate bulky AC power transformers.
• 10 AMP Rating
  • 10 Amp rating featuring a high inrush magnetic circuit breaker for added protection.
• Eleven Total Outlets
  • 11 total outlets (10 rear panel outlets and one front panel convenience outlet).
• BNC Lamp Connector
  • Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination.

SPECIFICATIONS

• Maximum Output Current: 10 Amps
• Line Cords: 3/1.0mm AWG, 2.5m. captive with IEC female to Schuko plug
• Power Consumption: 25 VA
• Lights: Pull out, two multi-LED dimmable lamps
• BNC Socket with Switch for rear rack lamp, 12VAC 500mA max (Lamp NOT included)
• Operating Voltage: 180 to 274 VAC
• Over Voltage Shutdown: 275 VAC nominal
• Spike Protection Mode: Line to neutral, zero ground leakage
• Spike Clamping Voltage: 375 VAC Peak @ 3,000 amps
• Response Time: 1 nanosecond
• Maximum Surge Current: 6,500 amps
• Noise Attenuation: 10 db @ 10 khz, 40 db @ 100 khz, 50 db @ 500 khz
• Dimensions: 1.75" H x 19" W x 10.5" D (44.5 H x 482.6 W x 266.7 D mm)
• Weight: 12 lbs (4.5 kg)
• Includes: Removable IEC female to 10A male Schuko plug