Furman PL-PRO DMC 20A Power Conditioner with Lights & Voltmeter/Ammeter

The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world’s most advanced and comprehensive transient voltage surge supressors.

You’ve got a rack for your effects, preamps, tuner…You’re going to plug that into the wall? One big spike and your rig is up in smoke. Furman’s advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman’s advanced Linear Filtering Technology, you’ll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.

Can’t track down where that noise is coming from? Your mix sounding flat? With Furman’s advanced Linear Filtering Technology you’ll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman’s advanced Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and eleven total outlets, it’s enough to power your whole home studio.

FEATURES

• Surge Protection
  • Furman’s exclusive SMP technology provides the highest level of surge & spike protection available.
• Noise Filtration
  • LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity.
• Voltage Protection
  • Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.
• Pull-out Lights
  • Dual smooth track retractable LED lights illuminate equipment in your rack.
• Diagnostic Lights
  • LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.
• USB Charger
  • Front panel convenience charger allows you to charge most media devices or power a USB lamp.
• Voltmeter / Ammeter
  
  • Large digital voltmeter / ammeter, with discrete dimmer button, displays line votlage and true RMS current draw.
• Isolated Banks
  • Isolated outlet banks minimize inter-component interference and noise contamination.
• Wall Wart Spacing
  • Three widely spaced outlets accommodate bulky AC power transformers.
• 20 AMP Rating
  • 20 Amp rating featuring a high inrush magnetic circuit breaker for added protection.
• Nine Total Outlets
  • Nine total outlets (8 rear panel outlets and 1 front panel convenience outlet).
• BNC Lamp Connector
  • Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination.

SPECIFICATIONS

• Maximum Output Current: 20 Amps
• Line Cords: 3/12 AWG, 10 ft. captive with NEMA 5-20P plug
• Line Voltage: 120 (Volts)
• Power Consumption: 12 watts
• Front Panel:
  • Lights: Pull out, two multi-LED dimmable lamps
  • Front Panel Meter(s): Digital voltmeter/ammeter
  • Control: On/Off switch
• BNC Socket with Switch: Rear rack lamp, 12VAC 500mA max (Lamp NOT included)
• Number of Outlets: 9 (all linearly filtered and surge protected)
• Number of Isolated Banks: 2
• AC Protection:
  • Operating Voltage: 90 to 139 VAC
  • Over Voltage Shutdown: 140 VAC nominal
  • Under-Voltage Shutoff: 90V
  • Voltage Regulation: No
  • Spike Protection Mode: Line to neutral, zero ground leakage
  • Spike Clamping Voltage: 188 VAC Peak @ 3,000 amps
  • Response Time: 1 nanosecond
  • Maximum Surge Current: 6,500 amps
• Noise Attenuation: 10 db @ 10 kHz, 40 db @ 100 kHz, 50 db @ 500 kHz
• Signal Protection: No
• Physical:
  • Rack Mountable: Yes
  • Rack Ears Included: Yes
  • Construction: Steel chassis, .120″ brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
  • Dimensions: 1.75" H x 19" W x 10.5" D
  • Weight: 12 lbs (5.4 kg)