JBL Control 85M Two-Way 5.25" Coaxial Mushroom Landscape Speaker (Single)

New – Open Box: The item is in perfect working condition with intact original packaging and in like new condition. Packaging may have minor damage.

Two-Way 5.25 inch (135mm) Coaxial Mushroom Landscape Speaker

Designed for outdoor applications, the highly weather resistant JBL Control 80 Series Landscape speakers provide excellent full-range sound quality and 360 degree coverage. Designed to be mounted on or in the ground, Control 80 Series Landscape speakers can be used in a wide variety of applications including shopping malls, theme parks, sports venues, hotels, casinos, resorts, restaurants, hospitality and leisure venues, entrance ways, and anywhere a high quality music and/or paging speaker landscape speaker is required. Compact in design, the speaker is unobtrusive and easily blends in with its surroundings. A tough polyethylene enclosure resists abuse from lawn care equipment and the elements, and the enclosure color extends throughout the material so the speaker will maintain color even when scraped or scratched.

FEATURES

• Highly weather resistant - perfect for outdoor use
• 360° coverage - can be used in a wide variey of applications
• Compact size - allows the speaker to be blend into landscaping and shrubbery
• Tough polyethylene enclosure

WHAT'S INCLUDED

• (1) Control 85M Landscape Speaker
• (2) Wire nuts
• (2) Gland nuts
• (1) Security right-angle screwdriver

SPECIFICATIONS

• Frequency Response (-10dB): 55 Hz – 18 kHz
• Power Rating: 45 W (RMS)
• Transformer Taps:
  • 70V = 30W RMS, 15W RMS, 7.5W RMS & 3.8W RMS
  • 100V = 30W RMS, 15W RMS, 7.5W RMS
• Frequency Response (±3 dB): 65Hz - 16 kHz
• Maximum Input Voltage: 23.3 V
• Sensitivity: 86 dB, 1W @ 1m (ave. 80Hz - 16kHz)
• Nominal Coverage Angle: 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground)
• Directivity (Q): 2.2
• Directivity Index (DI): 3.4 dB
• Maximum SPL: 105 dB @ 1m
• Nominal Impedance: 8Ω (at 8Ω setting)
• Insertion Loss: <1.0 dB at any tap setting
• Thru Setting: 8Ω nominal
• Crossover Type: 2nd Order LPF on LF and 2nd Order HPF on HF
• Recommended Protective High-Pass: 65 Hz for 8Ω operation, 24 dB/oct ; 60 Hz for 30W tap, 24 dB/oct ; 50 Hz for 15W, 7,5W, and 3.7W taps, 24 dB/oct
• Low Frequency Driver: 135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround.
• High Frequency Driver: 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome
• Terminals: Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section).
• Wiring: Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For installation instructions see Installation Guide (# IS C80MLS).
• Installer-Supplied Required Tools: 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.
• Material: LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated
• Grille: Powder coated stainless steel.
• Environmental: IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
• Agency Ratings: UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
• Dimensions
  • Height: 17 in. (432 mm)
  • Width: 11.5 in. 291 mm)
  • Depth: 11.5 in. (291 mm)
• Net Weight: 12 lb (5.5 kg)
• Shipping Weight: 16 lb (7.3 kg)