Lighting Control

DMX control goes from wired to wireless with D-Fi XLR RX! This compact battery-powered wireless D-Fi receiver uses revolutionary Chauvet DJ technology to provide instant wireless communication by plugging directly into the XLR port of DMX-compatible...

Make any DMX-compatible light wireless! The wonders of wireless DMX control have arrived to previously non-wireless lights with the Chauvet DJ D-Fi XLR. This cutting-edge technology provides instant wireless communication through compact battery-powered...

The Chauvet DJ Data Stream 8 is a flexible DMX splitter designed to distribute and boost incoming DMX signals from dual inputs into 8 separate outputs via a master 3-position switch. Each input can be used simultaneously and sent to any output...

The Chauvet DJ Data Stream 4 is a universal DMX-512 optical splitter designed to distribute the incoming DMX signal, in daisy chain configurations, into four separate outputs with an additional “thru” port. FEATURES Universal, optical DMX...

Littlite 18" LED Task Light with dual colors white or red LEDs. 18" flexible gooseneck with an attached lamp and a base chassis. The chassis with a three-way rotary switch enables user to toggle between white light and red light output. Littlite L-LED...

Littlite LED Gooseneck light with 3-pin XLR connector. Light output is white. Featuring Littlite's proprietary XLR LLX connector. DETAILS Model: 18X-LED (18" LED Console Gooseneck Light) Connector: 3-Pin XLR Gooseneck Length: 18 inches (45.72...

The Littlite CWB (Cast Weighted Base) can turn your Littlite lampset* into a desk light. A new improved design features four rubber feet for maximum stability. NOTE: CWB will not work with L-7 series lampsets.

Littlite LW-18-LED Dimming Desk Light included a weighted round base, a gooseneck light, and a dimmer control to create a space saving, flexible desk light. The LW-LED series features a white/red LED array producing a red output at lower settings and...

Littlite LED Gooseneck light with 3-pin right angle XLR connector. Light output is white. Featuring Littlite's proprietary LLX connector. DETAILS Model: 18XR-LED (18" LED Right Angle Console Gooseneck Light) Connector: 3-Pin XLR Gooseneck Length: 18...

Replacement O-rings packaged in quantities of 12. For use with X series hoods used in Littlite's X and XR series console lights with an XLR connector manufactured prior to 2013.

Replacement O-rings packaged in quantities of 12. For use with High and Low series hoods. Will not work with X Hoods.

The Obsidian Control Systems NX SYNC captures timecode in various SMPTE formats from its 3-pin XLR connection and converts it to a MIDI Timecode (MTC) stream, where it can be read into ONYX or any other MIDI Timecode compatible software. Additionally, it...

The Enttec S-Play is Smart DMX Playback and Recorder that features a compact solid state design, a web-based scene generator, is capable of static and dynamic scene playback, and includes multiple triggering options, including iPad or Tablet Remote...

The Obsidian Control Systems NETRON RDM 10 is a first of its kind hybrid splitter. Dual DMX input, 10 port RDM Splitter, Merger and EtherDMX Gateway are unified into the RDM10, with an advanced feature set to cover a wide variety of applications. 99...

The Obsidian Control Systems Netron EP4 is a compact Ethernet to DMX gateway with four RDM compatible ports. It is configurable via its internal web remote and powered over Ethernet or via the USB-C connection. As a four Universe Node the EP4 is ideally...

The Obsidian Control Systems Netron EN4 is a powerful Ethernet to DMX gateway with four RDM compatible ports. Designed for live production and installations with a rugged housing and high-performance processing it offers flexible mounting options to...

ColorSource Relay combines power sequencing and data distribution in a portable plug-and-play format. Available with a hardwired DMX input, the ColorSource Relay is ready to go with no programming required. If you want to personalize your setup, both...

The grandMA3 onPC 8Port Node 4k PoE represents MA Lighting's largest model of Nodes. On the one hand, it is the perfect solution for distributing your DMX lines from a central rack in a theatre or TV studio. On the other hand, it is a powerful device if...

The T2 from Avolites is their Titan One Two Universe DMX to USB Interface with MIDI and SMPTE. This entry level product with improved capabilities comes in a rugged and slick design. The T2 allows access to the full Titan PC Suite with features including...

QuickQ Rack is a small rack mountable version of the QuickQ console designed for installations. It features the same operating system as QuickQ series consoles, but is designed to operate as a remote system without physical user control. Featuring 10...

The ChamSys MagicQ MQ70 is the latest offering in the Compact Console range of small and lightweight consoles that you can fly with. The MagicQ MQ70 fits within hand luggage carry on restrictions of all the major budget airlines including, Southwest,...

The Acclaim Lighting UDM or Universal Dimming Module is a multi-protocol driver, designed to allow conversions between popular control protocols. It's inputs are DMX & 0-10V, while it's outputs are DMX, 0-10V, and IGBT digital line voltage...

The Chauvet Professional RDM2go is a multi-functional tool for working with fixtures over a DMX/RDM data line. This palm-sized controller performs a multitude of tasks including RDM functionality, DMX snapshot and test-scene record and playback, DMX...

12v Power Supply for SHoW DMX Transceivers.

With tens of thousands of units sold since their introduction in 2011, ShoW Baby plug and play transceivers set the standard for ease of use and reliability at an affordable price point. The addition of Multiverse radio technology enhances the...

Antenna for the City Theatrical Show Baby 6 wireless DMX transceiver.

Specifications: Black Out: Turns fixture On/OffAuto Run: Automatically run through built-in programsProgram Selection: Access units built-in programsFlash: Strobe effectSpeed: Control speed of Auto RunDMX Mode SelectSound Active: Activates sound active...

ChamSys QuickQ 10 is part of ChamSys QuickQ range of user friendly and affordable lighting control consoles. The QuickQ 10 is the perfect choice console for control of dimmer and LED colour mixing fixtures. The console features a large 9.7 inch touch...

MagicQ MQ500M Stadium Wing is designed to operate with the MagicQ MQ500M Stadium console at the highest level of show control. MQ500M Stadium Wing features 30 playbacks in total: 15 motorised faders and 15 encoder playbacks all with RGB illumination. The...

MoonLiteTM is a brand new patent-pending wireless lighting control product with LumenRadio's updated award winning ultra-reliable CRMX technology combined with Bluetooth connectivity and a built-in battery. By being a wireless DMX transmitter and...

The ChamSys QuickQ 30 is part of ChamSys QuickQ range of user friendly and affordable lighting control consoles. The QuickQ 30 is the perfect choice console for control of dimmer, LED colour mixing and moving light fixtures. The console features a large...

QuickQ 20 is part of ChamSys QuickQ range of user friendly and affordable lighting control consoles. The QuickQ 20 is the perfect choice console for control of dimmer, LED colour mixing and moving light fixtures. The console features a large 9.7 inch...

The Obsidian Control Systems 19" Netron rack shelf allows up to two Netron products to be mounted. It is provided with a blind plate for the install of a single product and includes all screws required for two devices. FEATURES Rackmount Adapter...

The Obsidian Control Systems Netron RDM 6XL is a rugged and compact DMX/RDM Splitter. Designed for live production and installations, it features six opto-isolated 5-pin XLR outputs and flexible mounting options to cover any situation. FEATURES (6) XLR...

The Obsidian Control Systems Netron RDM 645 is a rugged and compact DMX/RDM Splitter. Designed for live production and installations, it features six opto-isolated RJ45 DMX outputs and flexible mounting options to cover any situation. FEATURES (6)...

The Obsidian Control Systems Netron EN12 is a powerful high-density Ethernet to DMX gateway with twelve RDM compatible ports. Easy to configure with a range of integrated presets plus a wide array of advanced merge and routing features it is the ideal...

The Obsidian Control Systems NX DMX is a USB powered 2-Port DMX Node. As a member of the innovative ONYX platform from Obsidian Control Systems the NX DMX provides instant access to DMX In and Outputs as well as RDM co mmunication. The device is plug and...

The Obsidian Control Systems NX2 is the ultimate compact yet powerful fully integrated lighting controller. As a member of the innovative ONYX platform from Obsidian Control Systems the NX2 is feature rich and never restricted inits capabilities. NX2...

The Obsidian Control Systems NX4 is a comprehensive feature packed control surface. With a well-arranged combination of motorized and manual faders as well as an array of playback button the NX4 offers 44 total playbacks in a compact yet extremely...

The Multiverse® Node is the first building block of the Multiverse system. Each Multiverse Node is a transceiver. As a single universe transmitter, it functions in a similar plug and play manner to our SHoW DMX SHoW Baby ®, but contains two...