Martin Rush MH6 Wash CT Used - In Stock and Available!

Used – Very Good: This item was lightly used as demo unit. It has been well-cared-for, has undergone limited use, and is still in excellent working condition. It may show limited signs of wear, i.e. small scratches or cosmetic errors.
The original packaging may be damaged, or the item could be repackaged.
Any missing accessories must be clearly defined for each item.

The RUSH MH 6 Wash CT is designed for key lighting applications within the House of Worship, Performing Arts and Live Stage environments where color temperature control of white light is critical but also a compact and light weight design is desired for smaller applications

The RUSH MH 6 WASH CT is a bright single-lens LED moving head with fully premixed white color temperatures. With twelve 10W WW/CW (warm white and cold white) LEDs and a 10° to 60° motorized zoom, it offers full electronic dimming and variable strobe effects controlled via DMX.

• Pre mixed white light ranging from 2,700K to 7,800K    
• 10-60 Degree Zoom System
• Compact and Lightweight Design

FEATURES

• 2,700K to 7,800K Color Temp Range
• Allows key lighting to be matched for multiple sources from Tungsten to Metal Halide
• 10-60 Degree Zoom System
• Compact and lightweight design
• Can be used as a Mid effect with a tight beam look to washing a stage for key lighting applications
• Ideal for applications that have limited ceiling height or weight restrictions.

WHAT'S INCLUDED

• Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug
• Omega bracket for rigging clamp attachment

PHYSICAL

• Length: 11.4 in. (290 mm)
• Width: 7.4 in. (189 mm)
• Height: 14.2 in. (360 mm)
• Weight: 15.7 lbs. (7.1 kg)

DYNAMIC EFFECTS

• Electronic dimming: 0 - 100%, four dimming curve options
• Strobe and pulse effects: Variable speed and action, random strobe
• Electronic shutter effect: Instant open and blackout
• Zoom: Motorized
• Pan: 540°
• Tilt: 200°

CONTROL AND PROGRAMMING

• Control options: DMX
• DMX channels: 14
• 16-bit fine control: Dimming, pan and tilt
• DMX address setting: Control panel with LCD display
• DMX compliance: USITT DMX512/1990

OPTICS

• Zoom range: 10° - 60°
• Light source: 12 x 10W OSRAM OSTAR WW/CW LEDs
• Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
• Binning: Tight color and flux binning
• *Figure obtained under manufacturer's test conditions.

CONSTRUCTION

• Housing: High-impact flame-retardant thermoplastic
• Color: Black
• Ingress protection rating: IP20

INSTALLATION

• Mounting points: One quarter‐turn bracket for rigging clamp
• Location: Indoor use only, must be fastened to surface or structure
• Orientation: Any
• Minimum distance to combustible materials: 100 mm (4 in.)
• Minimum distance to illuminated surfaces: 200 mm (8 in.)
• Minimum clearance around fan and air vents: 100 mm (4 in.)

CONNECTIONS

• AC power in, thru: Neutrik PowerCon
• DMX data in, thru: 3-pin and 5-pin locking XLR

ELECTRICAL

• AC power: 100-240 V nominal, 50/60 Hz
• Fuse: T 3.15 A
• Typical half-cycle RMS inrush current: 11.3 A (at 240 VAC)
• Power supply unit: Auto-ranging electronic switch mode
• Recommended Miniature Circuit Breaker: Type D*
• *Per IEC 60898/UL489/CSA C22.2 No. 5
• Power consumption figures are typical, not maximum. Allow for +/-10% variation.

TYPICAL POWER AND CURRENT

• 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99
• 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94
• Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

THERMAL

• Cooling: Forced air (temperature-regulated, low noise)
• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Minimum ambient temperature (Ta min.): 0° C (32° F)

APPROVALS

• EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
• US safety: UL 1573, UL 8750
• US EMC: CFR Title 47 Part 15