Pro-Glow GLOW DOTS 1'' 100/Roll

Description:

Pro Glow Dots has a non-radioactive chemical light source incorporated into a flexible vinyl film that glows in total darkness after exposure to artificial or natural light. The photoluminescent film light source is designed to absorb energy from any nearby ambient light such as fluorescent lamps or sunlight. Once the source of extraneous light is removed, Pro Glow Dots film immediately emits a light of its own. There is no limit to the number of times this product can be recharged. When fully charged, Pro Glow Dots provides positive luminance for up to 10 hours.

Pro Tapes Pro-Glow 1 inch wide Glow-in-the-Dark Tape is a phosphorescent vinyl film tape which glows in total darkness after exposure to artificial or natural light. The photoluminescent light source is designed to absorb energy from any nearby ambient light such as fluorescent lamps or sunlight. Once the source of extraneous light is removed Pro-Glow emits a light source of its own which is visible to the night-adjusted eye.

When fully charged Pro-Glow provides luminance for up to 2 hours. It will glows brightest for the first 15 to 30 minutes after charging has ceased, but will remain visible in a totally dark room to the night-adjusted eye; however it would not compare it brightness to a standard flashlight. There isn't a limit to the number of times this product can be recharged (also remains highly effective for use for up to 6 years).

In its uncharged state the tape has a whitish/yellow color and when glowing the tape has a luminescent lime green color.

Pro Glow is used to spike stages for the placement of scenery and to mark exits, light switches and panels in dark areas. The tape's flexible backing is conformable and easy to cut with a scissors. The tape is thicker then you expect at 0.25 millimeters thick. It can be covered with clear packing tape to prevent the edges from peeling up.

Recommended for interior applications only.

Dot Size: 1 inch diameter dots x 10o dots per roll phosphorescent vinyl film

TECHNICAL SPECS

• Backing: Phosphorescent vinyl film
• Adhesive: solvent-based acrylic
• Liner: Poly coated 75-pound yellow paper
• Total Thickness: 25 mils
• Application Temperature: 50°F to 100°F
• OperatingTemperature:-20°F to 200°F