QSC AD-P4T 4.5" 2-way Pendant Speaker, Black

New - open box.

The QSC AcousticDesign™ AD-P4T is a 4.5" two-way pendant-mount loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16Ω bypass configurations.

The AD-P4T features a high quality 4.5" weather treated paper cone woofer with a 1" voice coil and a .075" aluminum dome tweeter positioned on a DMT waveguide.

The accurate frequency response of the AD-P4T is maintained even in 70/100V applications by use of a low-loss, lowsaturation 30-watt transformer with selectable taps, including 16Ω bypass, using a rotary selector located under the snap-fit magnetically attached powder coat steel grille

FEATURES

• Consistent tonal characteristics across the entire AcousticDesign family in surface, ceiling, and pendant applications
• DMT (Directivity Matched Transition™) waveguide ensures smooth, uniform frequency response over the coverage area
• Snap-fit magnetic grill
• 2x quick-link suspension cables and slip-lock fasteners provided
• Intrinsic Correction™ voicings available via Q-SYS Q-SYS Platform and CXD Series amplifiers
• Low-saturation and low-loss 70/100V transformers with 16Ω bypass
• Blemish-free removable logo
• Sealable input cover to prevent moisture from entering the input terminal block
• UL1480 certified

SPECIFICATIONS

• LF transducer :114 mm [4.5 in] weather treated paper cone woofer
• HF transducer: 19 mm [0.75" in] aluminum dome tweeter
• Effective frequency range: 65 Hz – 20 kHz *1
• Rated noise power / voltage: 30 watts / 22 volts (rms) *2
• Sensitivity [dB]: 87.9 *4
• Rated coverage (‐6 dB): 150° conical DMT™ *3
• Directivity factor: 4.5 *3
• Directivity index [dB]: 6.5 *3
• Maximum continuous SPL [dB]: 102 *5
• Maximum peak SPL [dB]: 108 *5
• Nominal impedance [ohms]: 16
• Recommended amplifier: 60 watts
• Transformer taps / impedance: 16Ω (in bypass setting)
  • 3.75W (70V); 7.5W (100V) Tap: 1333Ω
  • V7.5W (70V); 15W (100V) Tap: 667Ω
  • V15W (70V); 30W (100V) Tap: 333Ω
  • 30W (70V); N/A (100V) Tap: 167Ω
• Input connector type: Euroblock connector with parallel output
• Enclosure material: Flame retardant ABS 765A VO baffle and back can
• Grille material: Powder coated steel
• Ingress protection: IP-34
• Operating environment: Designed for indoor use
• Operating temperature range: -20 to 50° C (-4 to 122° F)
• Net weight: 6.5 lb (2.9 kg)
• Product dimensions: (Diameter x Height): 9.3 x 10.7 in. (237 x 272 mm)
• Shipping weight: 8.7 lb (3.9 kg)
• Shipping dimensions (H x W x D): 11.75 x 14.25 x 11.25 in. (298 x 362 x 286 mm)
• Included Mounting Hardware:
  • Two quick-link cable assemblies. (Length 128 in. (3.25m) x 2 mm thickness)
  • Two slip-lock fasteners
  • Locking euro-block connector,
  • Sealable input cover and screw
  • Snap-fit magnetic grille
• Safety Agency: UL1480, Transformer UL registered per UL1876, ROHS, CE compliant. Baffle meets UL94-V0 and UL94-5VB flamibility rating; in accordance with IEC60849 / EN60849 systems.

*1 IES60268-5 50 Hz high passed noise signal for 2 hr, 16 ohm
*2 -10dB from rated sensitivity
*3 -6db from on-axis, 500Hz - 5kHz
*4 500 Hz–5 kHz average
*5 Calculated from rated noise voltage and sensitivity