Radial

Radial ProDI 1-Channel Passive Instrument Direct Box

Write a Review
MPN:
R800 1100 00
Availability:
Usually ships within 2 business days when in stock.
  • Radial ProDI Passive Direct Box front left
  • Radial ProDI Passive Direct Box front right
  • Radial ProDI Passive Direct Box front
  • Radial ProDI Passive Direct Box input and thru
  • Radial ProDI Passive Direct Box output
  • Radial ProDI Passive Direct Box application 1
  • Radial ProDI Passive Direct Box application 2
  • Radial ProDI Passive Direct Box application 3
$129.99

Description

The Radial ProDI is a passive direct box designed for use on stage or in home recording studios, with the ability to handle high output instruments without distortion, and a transformer-isolated output to eliminate noise from ground loops.

The ProDI features a custom-made transformer that is able to handle high levels without saturation. This high-performance transformer has an exceptionally linear frequency response from 20Hz to 18kHz, making it ideal for electronic musical instruments and audio equipment. The ProDI also features a -15dB PAD for high output sources and ground lift switch to troubleshoot noise from ground loops. The ProDI is a great choice for bass and acoustic guitar. 

The ProDI is housed in an extremely rugged two piece 14 gauge steel enclosure with a book-end-designed outer shell that prevents damage to the switches.

FEATURES

  • Great sounding, rugged passive DI
  • High performance custom-wound transformer
  • -15dB PAD for wide range of input levels
  • Ground lift switch eliminates ground loop hum
  • 'Plug & play' easy-to-use
  • Completely passive, no power needed
  • Ultra-tough design, to last a lifetime

COOL STUFF

  • 15dB PAD allows super-hot inputs such as CD players and headphone outputs to be connected
  • INPUT and THRU jacks connect from the instrument and to the instrument amplifier
  • XLR balanced 600Ω mic-level output for runs to 1000 feet without appreciable noise
  • Ground lift disconnects the ground path to the transformer at the XLR output
  • High performance transformer for distortion-free signal transfer and 100% isolation from ground loop hum
  • MU-Metal shield for protection against radio frequency and electromagnet interference
  • Full bottom pad improves electrical isolation and keeps ProDI from moving around on busy stages
  • Book end design creates a protective zone around the jacks and switches
  • 14-GAUGE STEEL welded I-beam enclosure makes it impossible to torque the PC board. Eliminates cold solder joints.

APPLICATIONS

  • ProDI - the single channel ProDI is perfect for mono instruments like guitar and bass.

SPECIFICATIONS

  • Audio circuit type: Passive, transformer based
  • Transformer: Eclipse ET-DB2, 12:1 ratio
  • Number of channels: Single channel (mono)
  • Frequency response: 20Hz ~ 18.5KHz (± 0.2dB)
  • Dynamic range: 128dB
  • Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB
  • Phase Deviation: 1° @ 100Hz; 8° @ 20Hz
  • Input Impedance: 140k Ohms, unbalanced
  • Output Impedance: 150 Ohms, balanced
  • Maximum Input: +18dB @ 20Hz

FEATURES

  • Input pad, Ground lift
  • Input Connectors: 1/4" in & thru
  • Output Connectors: XLR-M out

GENERAL

  • Construction: 14 gauge steel chassis & outer shell
  • Size (L x W x D): 4.25 x 2.75 x 1.75 in. (108 x 70 x 44 mm)
  • Weight: 1.2 lb (0.54 kg)
  • Shipping size (L x W x D): 6.5 x 4 x 3 in. (165 x 76 x 102 mm)
  • Shipping weight: 1.35 lb (0.61 kg)
  • Power: Passive, no power required
  • Conditions: For use in dry locations only between 5°C and 40°C
  • Warranty: Radial 3-year, transferable
View AllClose