Rosco OPTI-FLECS SwatchBook

OPTI-FLECS lighting control filters provide cost-effective, easy-to-use solutions to enhance the beam-quality of any LED source. A common description of LED light is that it looks "sterile" or "flat" and that illuminated objects or people appear “sallow” or “lifeless.” This is because white LEDs often contain an overabundance of green light-energy and lack the critical parts of the spectrum that make light attractive on skin tones and architectural surfaces. The OPTI-FLECS range of semi-rigid filters contains color filters that target specific spectral spikes and output anomalies found in LED fixtures, and several unique diffusion options for softening the oftentimes harsh, directional beam produced by LED lights.

OPTI-FLECS 3"x5" SwatchBook contains a sample of the 21 standard diffusions and colors.

OPTI-FLECS in Architectural Installations – The OPTI-FLECS range of LED filters is an excellent choice to aid in the design of an architectural project. OPTI-FLECS can be used to enhance skin tones of customers in a retail store, balance the output of LEDs with other sources or reduce glare and hotspots inside a display case.

OPTI-FLECS for Image Capture – The low-heat feature of LED lights means that gel is not an expendable anymore - it's an accessory, just like a scrim or a barn-door. OPTI-FLECS is a semi-rigid filter that offers cinematographers, gaffers, lighting directors and photographers a durable, reusable solution for correcting the problematic color-rendering aspects of LED lighting. The CTO's, Minus Greens and Neutral Densities are excellent tools for balancing LED lights - notably the green spike that traditional Minus Greens don't properly address. The diffusions and tints are perfect for softening the harsh output of an LED source and for enhancing the skin tones of on-camera talent.

OPTI-FLECS is available in 21 standard diffusions and colors that are available in two standard sizes: 30cm x 30cm and 60cm x 60cm. The material is 13 mil (0.013 inches, .33mm) thick. The semi-rigid nature of the product offers a protected, reusable filter solution that can be inserted into a multitude of LED fixtures used on-stage, in broadcast studios or in architectural installations.

SPECIFICTIONS

• Base: Polyester (PET) laminated to acrylic
• Gauge: 13 mil (0.013 inches, .33mm) nominal
• Max Width: 48 in (1.2m)
• Flame Retardant Rating:BS3944 PART 1 1992
• Compliance: RoHS, REACH, Proposition 65
• Optimal Working Temperature Range: -35°F - 240°F (-37.2°C - 115.6°C)

Note: This product is intended for use on low-heat LED sources only, and is not suitable for use on high heat fixtures. OPTI-FLECS filters are designed to be installed externally and are not intended to be used as an internal fixture component where higher operating temperatures may be present.

Installation: For best results, install the filter as far away from the emitter as possible. Install diffusions with the smooth side facing the source.

Care & Maintenance: Color filters and Powder Frost may be cleaned with mild soap and clean water. Other diffusions may be cleaned with mild soap and clean water on the smooth side.