RTS Telex BP-1002 Two-Channel Beltpack

Used – Good: The item was removed from a working system. It is still functional in that, it still powers on. We are unable to verify any further functionality. Bears signs of wear such as scratches, dents, worn corners, or identifying markings. Parts, accessories, and instructions may be missing. Please contact us if any issues arise.

The RTS BP-1002 is an ideal beltpack that keep users connected and offer mobility as well as hands free convenience. The power circuitry has been redesigned and reinforced to improve overall performance. For a completely portable intercom system, directly connect your belt pack to the back of an intercom Power Supply or Master Station.

Alternately, passive wall connector plates can be permanently installed at strategic locations, and the beltpacks can then be connected to these using cables. The BP-1002 is Clear-Com compatible.

FEATURES

• The Talk button activates the headset and can operate in either Hands-Free-Talk or Push-to-Talk Mode.
• The sidetone control adjusts your own voice level heard in the headphone.
• The call function allows the user to send or receive signals to other user stations on the intercom channel. The user can receive call light signals as well as send signals easily.
• The BP-1002 is Clear-Com Compatible

SPECIFICATIONS

Power Requirements:

• Channel Supplied: 24 VDC nominal, 40 to 100 mA

Environmental Requirements:

• Storage:  -20°C to 80ºC; 0% to 95% humidity, noncondensing
• Operating: 0ºC to 50°C; 0% to 95% humidity, noncondensing
• Dimensions: 5.0 in (127 mm) high, 3.5 in (88.9 mm) wide, 1.8 in (45.7 mm) deep
• Weight: 13 oz (0.36 kg)

Headset

• 1000 to 3000Ω electret microphone
• 150 to 600Ω headphones

Balanced Intercom Channel

• Output Level: 1Vrms nominal
• Terminating Impedance: 300Ω ±10%
• Bridging Impedance: greater than 10kΩ

Call Signaling

• Send: 20kHz ±100Hz, >0.5Vrms
• Receive: 20kHz ±800Hz, 100mVrms min.

Mic-Off Frequency

• Detect: 24kHz ±800Hz, 100mVrms min.
• Noise Contribution: less than -60dBu on the line

Connector Types

• BP-1002: One XLR-3M and XLR-3F pair, wired in parallel, for each channel (permits “loop-thru” connection)
• XLR-3 Balanced Configuration Pinouts
• Pin 1: Common
• Pin 2: Intercom audio low and +24VDC input
• Pin 3: Intercom audio high and +24VDC input
• XLR-6 Balanced Configuration Pinouts
• Pin 1: Common
• Pin 2: Local power (21 to 30VDC, 40 to 100mA)
• Pin 3: Intercom channel 1 audio low and +24VDC phantom power
• Pin 4: Intercom channel 1 audio high and +24VDC phantom power
• Pin 5: Intercom channel 2 audio low and +24VDC phantom power
• Pin 6: Intercom channel 2 audio high and +24VDC phantom power

Unbalanced Intercom Channel

• Output Level: 775mVrms ±10%
• Terminating Impedance: 200Ω ±10%
• Bridging Impedance: greater than 10kΩs

Call Signaling:

• Send: 12 ±3 VDC
• Receive: 4 VDC minimum

Connector Type: Uses same connectors as for balanced mode, above, but with pinouts modified as follows:

• XLR-3 Unbalanced Configuration Pinout
• Pin 1: Common Audio & Power
• Pin 2:  +30VDC input
• Pin 3:  Intercom audio
• XLR-6 Unbalanced Confi guration Pinouts
• Pin 1: Common Audio & Power
• Pin 2: Local power (21 to 30VDC, 40 to 100mA)
• Pin 3: Channel 1 +30VDC input
• Pin 4: Channel 1 Intercom audio and DC call
• Pin 5: Channel 2 +30VDC input
• Pin 6: Channel 2 Intercom audio and DC call

Headphone Amplifier

• Maximum Output: 3.5 ±10% Vrms into 150Ω headset
• Frequency Response: 200Hz to 8kHz ±2dB
• Audible Alert: 1kHz, at the headset
• Total Harmonic Distortion: Less than 1% at less than 3.25 Vrms into 150Ω headset
• Sidetone: 17dB minimum range, adjustable