TOA

TOA Electronics U-21S Unbalanced Line Input Module Remote Volume Control Screw T

Write a Review
MPN:
U-21S
Availability:
Usually ships within 2 business days when in stock.
  • TOA Electronics U-21S Unbalanced Line Input Module Remote Volume Control Screw T
  • TOA Electronics U-21S Unbalanced Line Input Module Remote Volume Control Screw T
$65.00

Description

TOA's U21S is for unbalanced, line level equipment such as AM/FM tuners, tape decks, and CD players. Allows remote control of input signal using an external potentiometer. Also configurable as a master remote volume control.

The U-21S is a line input module to be used in conjunction with the 900 series mixers/ amplifiers and other TOA's equipment. It has an unbalanced input with screw terminals, remote volume control function, and gain control.

FEATURES

  • For Unbalanced, Line Level Sources such as AM/FM tuners, cassette decks, CD players, computer sound cards, jukeboxes, mixers and satellite receivers.
  • Use For Adjacent Sources (less than 15 feet from the host unit).
  • Remote Volume Control by connecting an external 10 kΩ, linear-taper potentiometer to screw terminals #4 and #5.
  • Connector: screw terminal (U-21S)

TIPS

  • Tip! You can also connect a switch between screw terminals #4 and #5 for remote on/off operation. Closing the switch turns the module OFF, opening the switch turns the module ON. Note: Control line resistance greater than 200 Ω will prevent full attenuation (200 Ω = 3821 ft. of #24 AWG wire).
  • Tip! You can also use the U-21 as a stand-alone Remote Volume control by cutting Jumper J2 to disconnect the module's output from the mix bus. This function is useful in original 900 Series mixer/amplifiers which did not have built-in Remote Master Volume terminals or, as a second Remote Master Volume for the A-903/6/12MK2 mixer/amplifiers, the AX-1000A auto-mixer or the M900MK2 mixer/pre-amplifier. Connect the module input to the "Pre-Out" jack (or mixer output) and the module output to the "Power-In" jack (or adjacent power amplifier).

SPECIFICATIONS

  • Controls / Functions: Gain Control
  • Remote Volume Facility
  • Performance Input: 220kΩ
  • Input Sensitivity: -18 ~ +12dBu
  • Gain (Adjustable): -30 ~ 0dB
  • Maximum Input: +18dB
  • Signal to Noise (S/N): 90dBu (S/N)

 

  • Power Source: 24VDC (supplied from the main frame)
  • Current Consumption: 27mA
  • Input Sensitivity: -20dB* (rated output: -20dB*), adjustable: -20 to +10dB*
  • Input Impedance: 220kΩ, unbalanced
  • Frequency Response: 20Hz - 20kHz ± 1.5dB
  • Distortion: 0.05% or less (1kHz, output: 0dB*)
  • Noise Level: -106dB* (20Hz - 20kHz BPF)
  • Remote Control Range: 0 to -55dB
  • Connector: 5 Screw terminals
  • Dimensions: 35 (W) x 78 (H) x 88 (D) mm (1.38 x 3.07" x 3.46 in.)
  • Weight: Max. 65g (0.14lbs)
View AllClose