Atlona AT-HDVS-RX HDBaseT to HDMI Scaler Receiver

Atlona Technologies HDBaseT to HDMI Scaler Receiver with Display Control.

The Atlona AT-HDVS-RX is an HDBaseT™ scaler receiver for HDMI transmission over category cable. Receives AV signals up to 1080p/60Hz and 1920×1200 video with embedded multi-channel audio and control signals up to 230 feet (70 meters). Features include balanced analog audio de-embedding, RS-232 control, and Power over Category cable (PoCc) for sending remote power to the HDVS series transmitter. The receiver offers advanced scaling capabilities including image adjustment capability and an Auto-set feature for matching incoming signals to the display’s native resolution. Designed for use with the HDVS series transmitters, the transmitter/receiver pair enables auto display on/off, auto-switching, 3rd-party control, and other features. The built-in scaler works with matrix switchers to optimize source signals with different resolutions to a display’s native resolution. The AT-HDVS-RX is ideal for long distance transmission and display control in corporate or educational settings using analog and digital sources.

FEATURES

Long distance HDMI extension

• Receives HDMI and VGA/Audio signals up to 230 ft (70m) @ 1080p over CAT6a/7 and 197 feet (60 m) @1080p over CAT5e/6
• Uses easy-to-integrate category cable for low-cost, reliable system installation

Scaled HDMI output and input resolution control

• Scales output video signals up to 1080p/60Hz and1920x1200; Set preferred input resolution from 800×600 to 1920×1200
• Assures compatibility of VGA and HDMI sources to the display’s native resolution

Audio de-embedding

• Provides two channel, analog audio signal on balanced captive screw connectors
• Improves AV system audio with the use of an external amplifier such as the Atlona AT-PA100-G2

RS-232 scaler control

• Image adjustments, resolution settings, and auto-set to display’s native resolution can be made from a 3rd party control system
• Seamless integration with larger, control system-based AV systems

Multi-channel audio compliant

• Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, and DTS-HD Master Audio™
• Allows any multi-channel audio stream to be used within a professional audio system

RS-232 display control

• Facilitates On/Off display control; Included software simplifies programming
• Eliminates need for complex control system in small AV systems

Field updatable firmware

• Rear panel USB port provides an easy means for kit upgrades
• Ensures long term system return on investment

Front panel Power and Link LEDs

• LED indicators provide Power and Link status information
• Provides easy setup and troubleshooting

Integrated mounting hardware

• Enclosure features four tabs for simple mounting
• Easily mounts behind display

Suggested transmitters:

AT-HDVS-TX – Dual HDMI and VGA/Audio to HDBaseT Switcher Transmitter AT-HDVS-TX-WP –HDMI and VGA/Audio to HDBaseT Switcher Transmitter Wall plate

Compact

• 1.18 in (30 mm) high and 4.8 in (122 mm) wide enclosure
• Easy installation behind display