dbx DriveRack 260

Used – Good: The item was removed from a working system and is in good condition. It has slight markings and minor cosmetic damage.

The dbx DriveRack® 260 loudspeaker management system has been designed to provide "Everything you need between the mixer and the power amps". From the powerful DSP modules to the multiple control surfaces, the 260 provides all the processing and control necessary for both installation and live use. Additionally, the Wizard function enables any user to quickly set up and use the 260 to its full potential by streamlining the setup process and providing a menu based setup procedure that includes system setup and configuration, Auto-EQ, and Advanced Feedback Suppression™ (AFS™) setup.

The 260 offers two inputs and six outputs on XLR connectors. Each input channel provides a choice of EQ, either a 9-band Parametric or a 28-band Graphic EQ. Each input channel also boasts two selectable insert processors with a selection of Notch Filtering, classic dbx® Compression, Auto Gain Control, Sub-Harmonic Synthesis, or our own patent-pending Advanced Feedback Suppression™ (AFS™). The DriveRack® 260 also offers a configurable Delay with 2.7 seconds of total delay time. The 260 provides full Bandpass and Crossover filtering and routing including Bessel, Butterworth and Linkwitz-Riley topologies. There is Parametric EQ available on each output as well as dbx® PeakStopPlus™ Limiting. The 260 provides a full-time RTA for live sound applications, while contractors will appreciate its control inputs for wall-panel logic and volume control.

SPECIFICATIONS

• A/D Converter: dbx Type IV™ Conversion System
• A/D Dynamic Range: (line) >113 dB, A-weighted, >110 dB unweighted
• Type IV Dynamic Range: >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW
• Sample Rate: 48kHz
• D/A Dynamic Range: 112 dB A-weighted, 109dB unweighted
• Dynamic Range: >110 dB A-weighted, >107dB unweighted
• THD+Noise: 0.003% typical at +4dBu, 1kHz, 0dB gain
• Frequency Response: 20Hz – 20kHz, +/- 0.5dB
• Interchannel Crosstalk: >110dB, 120dB typical, (input-to-output

AUDIO SPECIFICATIONS

• Input: (2) line inputs. (1) RTA Mic input
• Input Connectors: (2) Female XLR line inputs. XLR RTA Mic input
• Input Type: Electronically balanced/RF filtered
• Input Impedance: >40k ohm
• Max Input: +30dBu with input jumpers in +30 position
• CMRR: > 45dB
• Mic Preamp Phantom Power: +15VDC (RTA)
• Mic Preamp Equivalent Input Noise (EIN): < -110dB, 22Hz-22kHz, 150 ohm (RTA)
• Output: 6 total
• Output Connectors: Male XLR
• Output Type: Electronically balanced, RF filtered
• Output Impedance: 120ohm
• Max Output: +22dBu