ENTTEC 70067 Pixelator Mini 16 Universe Ethernet to Pixel Converter

ENTTEC's PIXELATOR MINI is an 8-port Ethernet pixel converter that forms the head end of the PLINK control system. Each PIXELATOR MINI can receive up to 16 Universes of DMX over Ethernet and converts them to ENTTEC’s proprietary PLINK protocol to be connected to Plink devices, (up to 2 universes of pixel control data is sent per port).

Each PLINK port can send data 300m using CAT6 cable to ENTTEC devices that receive PLINK data.

The PIXELATOR MINI is powerful enough to control up to 8,192 channels (2,730 RGB Pixels) with perfect synchronization and high refresh rate across all eight outputs.

The PIXELATOR MINI can be configured to receive sACN, ArtNet, ESP or Kling-Net, then set to output a wide range of output pixel protocols using its intuitive web interface.

Mount the PIXELATOR MINI in any location using the accessories included in the box from rack, to surface, to DIN. It can be powered using either PoE or the DC
Jack PSU that comes in the box.

Controlling LED pixels, dots and digital strips has never been easier! Depending on your project, you can partner the PIXELATOR MINI with an indoor or outdoor PLINK INJECTOR compatible with the pixels you’ve installed. Alternatively, pair it with our CVC4 AUTOADDRESSING CONSTANT VOLTAGE LED DIMMERS - to create large LED control systems with minimum configuration.

FEATURES

• 16 Universe Ethernet to PLINK data over Cat5e/Cat6 cable
• (8) RJ45 ports (each providing 2 Universes of PLINK data output)
• 1U Half Width form factor with mounting options for 1U Half Width Rack, 19” Rack, Surface mount,
  TS-35 DIN mounting
• Easy to configure & update through any web browser
• Supports sACN, Art-Net, ESP, Kling-Net
• RJ45 connector (10/100 Mbps)
• Active IEEE 802.3AF Active PoE or 12-24v DC power input
• All ports feature ESD surge protection and resettable fuses to block external faults & electrical noise propagation through control infrastructure
• Power and output status LED indicators
• Static or Dynamic (DHCP) IP configuration (DHCP by default)
• Compatible with ENTTEC PLINK INJECTOR range
• Compatible with ENTTEC CVC4 RGBW autoaddressable LED dimmer.
• Pixel grouping is configurable for each PLINK port. (1 to 340) for RGB / (1 to 256) for RGBW
• Each PLINK output can be assigned up to 2 Ethernet Universes
• Pixel ordering is configurable for each PLINK port