ENTTEC 73539 DIN Pixie 2-Universe DMX LED Pixel Controller

ENTTEC’s DIN Pixie allows control of 2 DMX universes of SPI pixels.

Control a maximum of (256 RGBW / 340 RGB / 1024
White) LED’s. Select between control modes and innovative grouping functions.

The DIN PIXIE has 4 personalities control how the two DMX-512A inputs are used to control pixel fixtures, providing flexibility to your installation.

Configuration, updates and standalone show upload is undertaken through a robust USB type-B port.

Standalone mode allows playback of a pre-recorded sequence with advance control option such as, play count, loop delay and play on power up.

Alternatively, the DIN PIXIE can be controlled via the USB Type-B connector using the PIXIE DRIVER API.

The DIN Pixie is powered by connecting it to the same power source as your LED pixel strip or Dots with a wide 5-48vDC input range. Use ENTTEC’s free PRO-MANAGER software to test, update and configure your DIN Pixie.

FEATURES

• Convert 2 DMX universes of DMX512 to Pixel Strip/Dots control protocols
• Configurable DMX start address and pixel grouping function to reduce control channel
  requirements
• Standalone show playback using inbuilt flash memory (4000 frames [~100 seconds])
• Option to play a show on DMX loss or blackout output
• Support for RGB and RGBW pixel strip and dots
• Wide (5-48VDC) operating voltage - power from the same source as your pixels
• All ports feature ESD surge protection and resettable fuses to block external faults &
  electrical noise propagation through control infrastructure
• Power and output status LED indicators
• Configurable and updatable via USB
• DMX input on RJ45 connectors. (ANSI E1.27-2)
• Robust USB type-B connector
• Pluggable screw terminal output connectors
• Test output sequences via PRO-MANAGER (no external data source required)
• Widely compatible FTDI driver USB support
• Backward compatible with the ENTTEC Pixie Driver API for USB -> SPI control