ENTTEC 8PXW60-12 RGBW LED Pixel Tape on Black 12V, 5 meter roll

The Enttec 8PXW60-F-12-B is an RGBW pixel tape printed on a black circuit board. The black circuit board is the best way to minimize external light reflection and conceal the workings of your installation when the display is switched off. It’s the stuff that a stealth designer’s dreams are made of.

Black PCB also absorbs and dissipates heat from LED chips more efficiently than standard white solder mask. Enttec has used superior thickened copper tracks to reduce the effects of volt drop and to allow a more even intensity along the length of the strip. In addition, with 20 RGBW pixels per metre, each capable of producing a 32-bit True Color display (4,294,967,296 variations) – this tape is ideal for both stage and architectural applications.

Precision-designed and manufactured to ENTTEC’s rigorous standards, some of our busiest professional clientele have been requesting this tape for years. We think you'll enjoy exploring the Dark Side too.

FEATURES

• Stealth! While it shares some of the same high-quality electronics that you've come to know and rely on from our other tapes, the black PCB makes this one special. We would say that it makes this tape stand out, but that’s precisely what it doesn't do.
• A clever designer will often want to use shadows and dark recesses to hide the inner workings of an installation in order to take an audience by surprise when the creation comes alive. This tape is perfect for that sort of thing. And fear not: it also looks good when it’s on!
• 60 RGB LEDs per meter: It boasts 20 color-calibrated, individually-addressable, RGBW LEDs per meter. Each Pixel is patched with three RGBW LEDS, and offers consistent brightness and extended colour gamut.
• Built for performance: Superior thickened copper tracks to reduce the effects of volt drop and to allow a more even intensity along the length of the strip.
• Bright and super-efficient: With a maximum power consumption of only 19.7 watts per meter (RGBW all on), and a lumen capacity of 511 lumens per meter, this 12V pixel tape provides a bright and efficient package.
• Millions of colors: Each pixel can achieve a 32-bit, True Color display. That’s a whopping 4,294,967,296 possible colors for each LED chip, with a scan frequency not less than 1.5KHz per second.
• Extend as you please: Join two lengths together or cut them into a smaller length. You can also operate the tape from up to 300m away using the ENTTEC Pixel Link system. This tape is recommended for indoor use only.

DETAILS

• 5 meter roll = 16.40 feet (196.85 inches)
• RGBW, 4 in 1 full color LED pixel strip
• Premium flexible white 3oz copper PCB’s
• Suitable for stage, entertainment and architectural applications
• 12V DC input supply voltage
• Maximum 19.7 Watts/Meter
• 60 LEDs/ meter LED density
• 20 pixel/ meter density
• 4.29 billion possible shades per LED
• 120-degree illumination
• UCS2904 IC chips
• Built-in data signal reshaping circuit
• 3M adhesive double side tape on the rear
• Can be cut or joined at each copper tab
• IP20 Indoor use only
• Designed for use with ENTTEC pixel products