Focusrite
Focusrite Scarlett 2i2 Studio (3rd Gen) USB Audio Interface
- MPN:
- AMS-SCAR2I2STU3G
- Availability:
- Usually ships within 2 business days when in stock.
Description
Scarlett brings Focusrite's professional sound quality to your home. No other interface sounds quite like Scarlett. The most popular USB audio interface Focusrite makes, mic, headphones and all the cables you need to get started. Scarlett 2i2 Studio is everything you need to make studio quality recordings at home.
FEATURES
- Hi-res 24-bit/192kHz converters give recordings stunning clarity. At home, in the studio or on the road, Scarlett sounds just like you.
- Mac, PC or iPadOS. Super-low latency means better takes. Better takes mean better recordings.
- Air has been breathing life into records for over thirty years. Add high-end detail to vocals and acoustic instruments. Get the sound of the iconic Focusrite Studio Console. Anywhere.
- Gain halos make setting levels simple. Find the sweet spot instantly and get great sound every time. No studio engineer required.
- Easy Start gets you set up in minutes. All the software you need is in the box. There’s no faster way to make studio quality recordings than Scarlett.
- Three year warranty
WHAT'S INCLUDED
- (1) Scarlett 2i2 (3rd Gen) audio interface
- (1) Scarlett Studio CM25 MkIII condenser mic & mic clip
- (1) Scarlett Studio HP60 MkIII headphones
- (1) Red XLR microphone cable (3m)
- (1) USB cable, Type `A' to Type `C'
- (1) Getting Started Guide (printed on inside of box lid)
- (1) Important Safety Information
SPECIFICATIONS
CM25 MkIII Mic Element
- Electret Condenser Diameter: 20mm
- Polar Pattern: Unidirectional (cardioid)
- Sensitivity: -36dB ±2dB (0dB = 1V/Pa @ 1kHz)
- Freq. Response: 20Hz - 20kHz
- Impedance: 200Ω ±30% (@ 1kHz)
- Rec. Load Impedance: >10kΩ
- Equivalent Noise Level: 16dBA (A-weighted IEC651)
- S/N Ratio: 74dB
- Power Requirement: 48V phantom supply
- Current: 3mA
- Mounting: Standard 5/8" female; 3/8" adaptor supplied
- Net Weight: 1.09lbs (496g), inc. DCZ-16 mic clip
- Body Dimensions: 1.95" diameter x 6.22" length (49.5 mm diameter x 158 mm length)
HP60 MkIII Headphones
- Type: Closed-back
- Drive Diameter: 50mm
- Impedance: 32Ω
- Sensitivity: 98dB ±3dB
- Freq. Response: 20Hz - 20kHz
- Max. Power Rating: 1.2W
- Cable Length: 9.8 ft (3 m) (approx.)
- Connectors: 3.5mm stereo jack, 1/4" screw-on adaptor
- Weight: 10.16oz (288g) (including cable)
2i2 Audio Interface
- SUPPORTED SAMPLE RATES
- 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- MICROPHONE INPUTS
- Frequency Response: 20Hz - 20kHz ± 0.1dB
- Dynamic Range: 111dB (A-weighted)
- THD+N: <0.0012%
- Noise EIN: -128dBu (A-weighted)
- Maximum Input Level: 9dBu (at minimum gain)
- Gain Range: 56dB
- Impedance: 3kΩ
- LINE INPUTS
- Frequency Response: 20Hz - 20kHz ± 0.1dB
- Dynamic Range: 110.5dB (A-weighted)
- THD+N: <0.002%
- Maximum Input Level: 22dBu (at minimum gain)
- Gain Range: 56dB
- Impedance: 60kΩ
- INSTRUMENT INPUTS
- Frequency Response: 20Hz - 20kHz ± 0.1dB
- Dynamic Range: 110dB (A-weighted)
- THD+N: <0.03%
- Maximum Input Level: 12.5dBu (at minimum gain)
- Gain Range: 56dB
- Impedance: 1.5MΩ
- LINE/MONITOR OUTPUTS
- Dynamic Range (Line Outputs): 108dB
- THD+N: <0.002%
- Maximum Output Level (0 dBFS): 15.5dBu
- Impedance: 430Ω
- HEADPHONE OUTPUTS
- Dynamic Range: 104dB (A-weighted)
- THD+N: <0.002%
- Maximum Output Level: 7dBu
- Impedance: <1Ω
- ANALOG INPUTS
- Connectors: XLR "Combo" type: Mic/Line/Inst (Inputs 1 - 2) on front panel
- Mic/Line Switching: Automatic
- Line/Instrument Switching: 2x front panel switches or via Focusrite Control
- Phantom Power: Shared 48V phantom power switch for inputs 1 & 2 (XLR only)
- AIR Function: Front panel switch or via Focusrite Control
- ANALOG OUTPUTS
- Balanced Outputs: 2x 1/4" TRS jacks on rear panel
- Stereo Headphone Output: 1/4" TRS jack on front panel
- Main Output Level Control: On front panel
- Headphones Level Control: On front panel
- OTHER I/O
- USB: 1x USB 2.0 Type C
- *requires 900mA USB port
- FRONT PANEL INDICATORS
- USB Power: Green LED
- Gain Halos: Tri-colour LED rings (concentric w/ GAIN controls)
- Phantom Power: Red LED
- Instrument Mode: 2x Red LEDs
- AIR Mode: 2x Amber LEDs
- Direct Monitor Mode: 2x Green LEDs
- PHYSICAL
- Dimensions (HxWxD): 1.87 x 6.89 x 3.89 in. (47.5 x 175 x 99 mm)
- Weight: 1.04 lbs (470 g)
- WARRANTY
- 2 year warranty