Lighting

Dirty Rigger Protector Kevlar Framer Gloves (Imported from the UK) Version 1 clearance. Outstanding durability from original Kevlar® 3-Short-Finger design  for brilliant dexterity with outstanding durability from original Kevlar®...

CLEARANCE!! Version 1 Dirty Rigger Leather Grip Full Finger Rigger Gloves (Imported from the UK) Double layer leather on fingers, palm and key wear areas for outstanding durability. Still includes Dirty Rigger's double stitching and palm...

The Accu-Cable EC-123-3FER50 is a 50-foot edison extension cable with a tri-tap on female end. Made with heavy duty 12 gauge, 3 wire cable rated for indoor or outdoor general purpose. Plug in multiple lighting fixtures with ease. Save time and money by...

The Accu-Cable EC-123-3FER25 is a 25-foot edison extension cable with a tri-tap on female end. Made with heavy duty 12 gauge, 3 wire cable rated for indoor or outdoor general purpose. Plug in multiple lighting fixtures with ease. Save time and money by...

3-pin DMX XLR Accu-Cable Connectors (1) Male and (1) Female3-pin DMX Connector: Gold Plated PinsMPN# ACXLR3PSET

The Doug Fleenor Design DMX1REL20A is a single channel unit, designed to switch up to a 20 amp line voltage load, and uses a 30 amp relay. The unit is provided with two 18" 12/3 SJ pigtails for line-in and switched line-out. Supplied with 15 amp parallel...

Doug Fleenor Design Preset 10 Architectural DMX512 Playback DeviceProduct DescriptionThe Preset 10 Architectural is a DMX512 playback device that can take up to ten snapshots from a DMX console and play them back at the press of a button. Fade times can...

The DMX Decelerator II is a DMX512 isolator and re-timing device. It can receive any signal within the DMX512 specification and it can accept some signals outside of the specification. It produces a DMX output signal with “relaxed” timing...

The AC3PDMXPRO5 Accu-Cable is a 5-foot long 3-Pin Pro DMX Cable from American DJ. This cable is useful for short DMX runs when daisy chaining units together. It uses 3-pin XLR connectors, which should not be confused with standard audio cables. Used for...

The AC3PDMXPRO10 Accu-Cable is a 10-foot long 3-Pin Pro DMX Cable from American DJ. This cable is useful for short DMX runs when daisy chaining units together. It uses 3-pin XLR connectors, which should not be confused with standard audio cables. Used...

The AC3PDMXPRO15 Accu-Cable is a 15-foot long 3-Pin Pro DMX Cable from American DJ. This cable is useful for short DMX runs when daisy chaining units together. It uses 3-pin XLR connectors, which should not be confused with standard audio cables. Used...

The AC3PDMXPRO25 Accu-Cable is a 25-foot long 3-Pin Pro DMX Cable from American DJ. This cable is great to have on hand for runs between fixtures or network devices. It uses 3-pin XLR connectors, which should not be confused with standard audio cables...

The AC3PDMXPRO50 Accu-Cable is a 50-foot long 3-Pin Pro DMX Cable from American DJ. This cable is useful for short DMX runs when daisy chaining units together. It uses 3-pin XLR connectors, which should not be confused with standard audio cables. Used...

The AC3PDMXPRO100 Accu-Cable is a 100-foot long 3-Pin Pro DMX Cable from American DJ. This cable is useful for short DMX runs when daisy chaining units together. It uses 3-pin XLR connectors, which should not be confused with standard audio cables. Used...

The AC5PDMXPRO15 Accu-Cable is a 15-foot long 5-pin Pro DMX Cable from American DJ. This cable is useful for short DMX runs when daisy chaining units together. It uses 5-pin male to 5-pin female XLR connectors. Used for linking lighting effects to...

The AC5PDMXPRO25 Accu-Cable is a 25-foot long 5-pin Pro DMX Cable from American DJ. This 25-foot cable is a great length to have on hand for extras or if you're not sure of a run distance. It uses 5-pin male to 5-pin female XLR connectors. Used for...

The AC5PDMXPRO5 Accu-Cable is a 5-foot long 5-pin Pro DMX Cable from American DJ. This cable is useful for short DMX runs when daisy chaining units together. It uses 5-pin male to 5-pin female XLR connectors. Used for linking lighting effects to control...

The Accu-Cable AC5PDMX100 is a 100-foot, 5-pin DMX Cable from American DJ. This is designed for connecting DMX controllers, DMX lights, and other 5-pin DMX devices into a stage lighting or effect system for live performance applications. The AC5PDMX100...

Accu-Cable's DMX Terminator pack has one 3-pin male DMX terminator and one 5-pin DMX terminator. Each terminator is 110 Ohm. It is recommended to use a terminator at the end of any DMX run. DMX Terminator pack includes (1) 3-pin DMX terminator and...

The Magmatic PRISMA WASH 25™ is an exterior IP65 rated UV wash luminaire that produces 365nm peak true UV output with zero visible light. Features include an impressive 20 degree narrow beam angle, manual adjustable tilt positioning and versatile...

The Magmatic PRISMA WASH 100™ is an exterior IP65 rated UV wash luminaire that produces 365nm peak true UV output with zero visible light. Features include a scoop LED reflector design which creates an impressive 90 degree wide beam angle, manual...

The Magmatic PRISMA MINI PAR 45™ is an IP65 rated exterior UV wash par luminaire that produces 365nm peak true UV output with zero visible light, and an impressive 45 degree beam angle. Powered by the PRISMA DRIVER 8™, features include an...

The Magmatic PRISMA MINI PAR 20™ is is an IP65 rated exterior UV wash par luminaire that produces 365nm peak true UV output with zero visible light, and an impressive 20 degree beam angle. Powered by the PRISMA DRIVER 8™, features include an...

The Magmatic PRISMA PAR 50™ is an exterior IP65 rated UV wash par luminaire that produces 365nm peak true UV output with zero visible light, and an impressive 50 degree wide beam angle from the large internal LED reflector. Features includes a user...

The Magmatic PRISMA PAR 20™ is an exterior IP65 rated UV wash par luminaire that produces 365nm peak true UV output with zero visible light. Features include a 20 degree narrow beam angle, a user friendly digital 2.5 inch LCD touch screen control...

PRISMA DRIVER 8 IP™ is an easy to use 48VDC, IP65 protected, driver system which provides individual DMX-512 control including variable delayed time di mming modes for up to (8) PRISMA MINI UV LED series fixtures including the PRISMA MINI PAR...

The Magmatic PRISMA DRIVER 8™ is an easy to use 48VDC driver system which provides individual DMX-512 control including variable delayed time di mming modes for up to (8) PRISMA MINI UV LED series fixtures including the PRISMA MINI PAR 20™,...

The Magmatic PRISMA MINI BAR 20™ is is an IP65 rated exterior UV wash bar luminaire that produces 365nm peak true UV output with zero visible light, and an impressive 20 degree beam angle. Powered by the PRISMA DRIVER 8™, features 2...

The Obsidian Control Systems ONYX Premier is an encrypted USB key to enable 64 ONYX Universes and unlock OSC, MIDI and Timecode features for PC Systems. This compact key carries an ONYX license that is instantly recognized by the ONYX software. No online...

The Obsidian Control Systems ONYX Essential is an encrypted USB key to enable 8 ONYX Universes and unlock OSC, MIDI and Timecode features for PC Systems. This compact key carries an ONYX license that is instantly recognized by the ONYX software. No...

The Obsidian Control Systems Netron EN12-45 is a powerful high-density Ethernet to DMX gateway with twelve RDM compatible ports. Easy to configure with a range of integrated presets plus a wide array of advanced merge and routing features it is the ideal...

The Obsidian Control Systems Netron EP2 is a compact Ethernet to DMX gateway with two RDM compatible ports designed for wall mount, truss mount and standalone installations. It is configurable via its internal web remote and powered over Ethernet or via...

The Elation KL PAR FC™ is a compact full-color-spectrum LED fixture that provides high output, precise color temperature control, full spectrum color rendering and even wash coverage. Offering powerful color intensity and a wide array of saturated and...

The Elation KL PANEL™ is a full-color-spectrum LED soft light that provides high output, precise color temperature control, full spectrum color rendering and even wash coverage. Optimized for the tunable white light requirements of Film and...

The Elation KL Fresnel 8 FC™ is a full-color-spectrum LED fixture that provides high output, precise color temperature control, full spectrum color rendering and even wash coverage. Optimized for the tunable white light requirements of Film and...

The Elation KL FRESNEL 6CW™ is a 150W 5,600K >97CRI Cool White LED fresnel, producing over 8,500 total lumen output. Features include manual and DMX control, 16° to 39° wide manual zoom, manual and DMX controlled di mmer and shutter, di...

The Elation KL FRESNEL 4CW™ is a 50W 5,600K >97CRI Cool White LED fresnel, producing over 2,300 total lumen output. Features include 14° to 33° wide manual zoom, manual and DMX controlled di mmer and shutter, rotary di mmer and zoom...

The Elation KL FRESNEL 8 CW™ is a 350W 5,600K >97CRI Cool White LED Fresnel, producing over 14,000 total lumen output. Features include manual and DMX control, 11° to 56° wide motorized zoom, manual and DMX controlled di mmer, shutter,...

The Obisidan Control System DMX10-5 is a rackmount 10-port DMX Splitter with dual inputs and freely assignable 5-pin XLR DMX outputs. Utilizing long life toggle switches every port is routed to either the A or B input, providing flexibility to acco...

The Obisidan Control System DMX10-3 is a rackmount 10-port DMX Splitter with dual inputs and freely assignable 3-pin XLR DMX outputs. Utilizing long life toggle switches every port is routed to either the A or B input, providing flexibility to acco...