Lighting Control

The ChamSys Lighting MagicDMX Full USB to DMX Interface offers a full universe of DMX control with RDM support and without any time limit. It has the option of being used either as Output, or as an Input enabling use for monitoring DMX. Remotely set DMX...

MagicDMX Basic interface is aimed at users wishing to evaluate and learn MagicQ, technicians wishing to test fixtures, as well as students wishing to learn lighting in schools and colleges. MagicDMX Basic supports output of a full DMX universe via a 3...

The SnakSys (by ChamSys Lighting) 10Scene Wall Plate features ten 10Scene trigger buttons, with dual colour LED status indication. Connect 10Scene wall plates directly to the QuickQ Rack or to the SnakeSys Gateway interface, where it can then integrate...

The ADJ Lighting WMX1, powered by Wolfmix, is a standalone lighting control system designed with the performer in mind. Featuring a 4.3” color touchscreen display and 37 backlit silicone buttons, it allows intuitive hands-on control of a DMX...

Control your lights wirelessly with the ADJ LED RC2. This remote can handle any task and offers an easy interface so you can focus on your performance instead of finding the right button. Eliminate any hassle by setting the right mood and use this remote...

The USB MIDI/LTC Widget provides a single Linear Timecode input and MIDI in/out/thru for any Hog 4 OS console or Hog 4 PC. Connect up to eight MIDI/LTC widgets to your console or each DMX Processor 8000, bringing multiple timecode sources to the console...

The ODE MK3 is a robust, reliable, installation-grade, Ethernet to DMX converter engineered to connect DMX fixtures to your Ethernet network infrastructure. Now you can expand your lighting project to the next level. With two Universes of bi-directional...

Featuring adjustable brightness, our LED204 Clip-On Duo LED Light illuminates two pages of sheet music. Its versatile base either clips to a music stand or rests upright on a flat surface. Two white LED lights on separate adjustable goosenecks facilitate...

With a clip that grips music stands, tables, and more, On-Stage's LED2224 Dual USB-Rechargeable Sheet Music Light performs brilliantly in any environment. Two lamp heads are supported by separate adjustable goosenecks that facilitate precise positioning...

The On-Stage LED518 USB Rechargeable Orchestra Light features a wide lamp head that illuminates two side-by-side pages of sheet music without overspill or hot spots. Two levels of brightness accommodate a variety of lighting requirements, and, to...

The Obsidian Control Systems NX K is a small USB-powered control surface for ONYX. The ideal companion for the NX1 console and ONYX PC systems, it replicates the full keypad and co mmand section of larger consoles. Four encoders complete the progra mming...

The Obsidian Control Systems NX P is a compact, motorized fader wing for the ONYX platform. The ideal expansion for any ONYX 1 console and ONYX PC systems, it replicates the full playback section of the NX1. Four integrated DMX ports provide instant...

The cmd_key for QLab* is a 94 key keyboard that is programmed and ready to take on programming your next gig with QLab 4*. With “silent” Cherry MX Black keys that are mounted on a steel frame in a small form factor for durability. The cmd_key...

The cmd_key from High Output is a 125 key keyboard that is programmed and ready to take with you on your next ETC EOS Family programming gig. With a near identical layout to current EOS Family Consoles from ETC, the cmd_key allows users to easily switch...

The Pathport series of DMX-over-Ethernet Gateways are the heart of DMX distribution. The Pathport Hand Held 1-Port Gateway is ideal for when a small, hand held DMX/RDM Ethernet Gateway is needed, such as touring or rental applications. The Pathport...

The D-Split is an optically-isolated DMX splitter and repeater for DMX512. With one input and four outputs, the D-Split gives you the ultimate flexibility to link up to 32 DMX fixtures. Need more outputs? Simply add more D-Splits to your chain! Instead...

The Enttec D-Split is an optically-isolated DMX splitter and repeater for DMX512. With one input and four outputs, the D-Split gives you the ultimate flexibility to link up to 32 DMX fixtures. Need more outputs? Simply add more D-Splits to your chain!...

The NETRON RJ-T is a compact useful adapter to convert ESTA compliant RJ45 DMX ports to a 3-wire screw terminal. Ideal for installations of NETRON RJ45 products like the RDM645 or the EN12-45 it is also a compatible with any other existing RJ45 DMX...

This upgrade works with the ETCnomad Puck Base Lighting Controller. This upgrade will increase the outputs by an additional 5,120 outputs. A physical controller is not included in this upgrade. When ordering output upgrades, provide your console serial...

This upgrade works with the ETCnomad software. This upgrade will increase the outputs by an additional 5,120 outputs. A physical key is not included in this upgrade. When ordering output upgrades, provide your console serial number, console ID and...

The ETC Eos Fader Wing x20 may be used to provide extended playbacks for Eos Ti, Gio, Gio @5, Ion, Ion Xe, Ion Xe 20, Eos/Ion/Ion Xe RPUs, RVIs, ETCnomad (PC or Mac native) and ETCnomad Puck. Up to three wings may be attached to any of these devices. The...

This upgrade will work for a Element 2 Console with 1,024 outputs. This upgrade will increase the outputs by an additional 5,120 for a total of 6,144 outputs. 6,144 ouputs is the maximum output count in the Element 2. A physical console is not included...

The Doug Fleenor Design DMX1REL20A is a single channel unit, designed to switch up to a 20 amp line voltage load, and uses a 30 amp relay. The unit is provided with two 18" 12/3 SJ pigtails for line-in and switched line-out. Supplied with 15 amp parallel...

The DMX Decelerator II is a DMX512 isolator and re-timing device. It can receive any signal within the DMX512 specification and it can accept some signals outside of the specification. It produces a DMX output signal with “relaxed” timing...

The Obsidian Control Systems ONYX Premier is an encrypted USB key to enable 64 ONYX Universes and unlock OSC, MIDI and Timecode features for PC Systems. This compact key carries an ONYX license that is instantly recognized by the ONYX software. No online...

The Obsidian Control Systems ONYX Essential is an encrypted USB key to enable 8 ONYX Universes and unlock OSC, MIDI and Timecode features for PC Systems. This compact key carries an ONYX license that is instantly recognized by the ONYX software. No...

The Obsidian Control Systems Netron EN12-45 is a powerful high-density Ethernet to DMX gateway with twelve RDM compatible ports. Easy to configure with a range of integrated presets plus a wide array of advanced merge and routing features it is the ideal...

The Obsidian Control Systems Netron EP2 is a compact Ethernet to DMX gateway with two RDM compatible ports designed for wall mount, truss mount and standalone installations. It is configurable via its internal web remote and powered over Ethernet or via...

The Obisidan Control System DMX10-5 is a rackmount 10-port DMX Splitter with dual inputs and freely assignable 5-pin XLR DMX outputs. Utilizing long life toggle switches every port is routed to either the A or B input, providing flexibility to acco...

The Obisidan Control System DMX10-3 is a rackmount 10-port DMX Splitter with dual inputs and freely assignable 3-pin XLR DMX outputs. Utilizing long life toggle switches every port is routed to either the A or B input, providing flexibility to acco...

The Chauvet Professional WELL Com makes it possible to control your W-DMX enabled lights from a smartphone or a tablet. This wireless interface hands you full control over your fixtures including the ability to build and save static looks or timed chases...

The Chauvet Professional ÉPIX Drive 2000 IP is IP65 outdoor-rated and hosts the processing and power supply for the ÉPIX IP and Tour system. With a maximum capacity of 2000 LEDs, ÉPIX Drive 2000 IP supports Art-Net, Kling-Net, and...

The Chauvet Professional ÉPIX Flex Drive controls the ÉPIX Flex 20 with 2 plug and play outputs that drive up to 4 ÉPIX Flex 20 at 960 LEDs each. Adding ÉPIX Flex Boost to each output doubles the capacity of the drive to 1920...

The Chauvet Professional ÉPIX Drive 900 hosts the processing and power supply for the ÉPIX Tour system. It supports either 18 ÉPIX Strip Tours or 6 ÉPIX Bar Tours, or any combination of the two, with a total capacity of 900...

The Chauvet Professional ÉPIX Flex Boost is a 24V in-line voltage booster that doubles the capacity of each output on the ÉPIX Flex Drive and the quantity of ÉPIX Flex 20 it controls. There is no need to solder into system with this...

The Chauvet Professional Net-XII is a versatile rack-mountable Ethernet-to-DMX node, which also functions as a merger for two controllers on either Ethernet or DMX inputs. It has the ability to record up to 10 DMX presets, which can be triggered remotely...

The Chauvet Professional Synapse 4 functions as an intelligent relay pack to control the power sent to individual lighting units. Synapse 4 can de-power entire sections of an installation, which prolongs the lifespan of lighting fixtures and decreases...

The Chauvet Professional RDMX Splitter 8 is a versatile RDM and 5-pin DMX opto-splitter with a rugged, durable housing. It features 8 outputs and 2 inputs, so it can instantly go from a 1×8 splitter to a 2×4 splitter for two different...

The Chauvet DJ Xpress-Rack 1024 is a rackmount DMX interface for ShowXpress™ software. The unit controls 2 DMX universes and unlocks an additional ArtNet universe (3 universes total). Easily store and play back 16 shows without a computer using...

The Chauvet DJ Xpress-512S is a powerful DMX interface that lets you control ShowXpress lighting control software on either Windows® and Mac OS X systems. You can easily store and play back 1 show without a computer. This self-contained, aluminum...