Look Solutions Cobra 3.1 Fog Machine

The Cobra 3.1 is a powerful fog generator, that sets high standards concerning noise and handling. The touchscreen makes the handling of the Cobra 3.1 easy and intuitive. Operation via Ethernet and RDM-features allow most exible use. The machine is supplied with a duct adaptor that also functions as a protection against contact.

FEATURES

• 230V only
• Extremely silent nozzle – With its newly developed nozzle the machine works very silent. The noise level at full output is 82.5 dBA (in compa- rison: the Viper 2.6 with 2600 Watt generats at full output 100.5 dBA). The nozzle can be unscrewed and cleaned as needed.
• Two pumps for constant output – The use of two pumps ensures a very constant fog output at any pump level. Therefore the continuous output up to 30% pump level is regulated from one pump, levels from 31% to 100% are re- gulated by a second, more powerful pump.
• New Touchscreen – All adjustments can be made easily and intuitive via the big Touchscreen with simple menu navigation.
• New controls – Beside the stand-alone, analogue and DMX 512 control, the machine can also be operated via Ethernet (Artnet and sACN).
• RDM-capable – The Cobra 3.1 is equipped with the following RDM-features:
  • Status: Ready, Re-heating, Error messages (E-1, E-2 etc) — DMX-Patc
  • Temperature: Heating element, PCB
  • Adjusting the Personality
  • General Informations about the machine
• Newly developed, extremely silent nozzle
  • Constant, steady output
  • DMX, Ethernet, RDM
  • Made in Germany
• Finest adjustments of the output – Digital technology enables new adjustments of the pump. In steps of 1% the output can be adjusted from 0 – 100%. Thus, any desired effect – from a tiny fog cloud to the thickest continuous fog – can be produced. This allows an individual adaptation to the dimensions of the room.
• Adjustable Pump characteristic – Depending on the use of the Cobra 3.1 and the desired effect, the user can choose between four different pump characte- ristics: Impulse, Extended, Flood and Continuous. The output and fogging time varies depending on the choo- sen pump characteristic.
• Adjustable Performance curve – For nest adjustments of the pump from 0% – 30%. In these- pump levels, the performance curve can be regulated 5% up or down, if the same output is needed at several machines or the aging process in uences the output. Thus, different fog amounts can be balanced.
• Internal Timer – With the internal timer, the fogging time can be adjsted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated.
• Working Hours Counter – The Cobra 3.1 is equipped with an working hours counter, that saves heating and fogging durations.

The following Look fog liquids are available for the Cobra 3.1:

• Quick-Fog (thick, quick disappearing fog liquid)
• Regular-Fog (thick, long lasting fog liquid)
• Slow-Fog (thick, extremely long lasting fog liquid)