Look Solutions Viper S Fog Machine

The Viper S is a 650 watt fog machine. Its small size makes it ideal for tight and harder to reach installations, while maintaining a significant output. The Viper S has an unobtrusive 750ml fluid reservoir tucked underneath the machine’s body. It has variable output that can be finely controlled, down to a whisper of smoke. It has a built in timer and DMX interface.

The Viper S fog generator with 650 W and an powerful output of approx. 8 meter perfectly completes the Viper S range. The Viper S is made for smaller stages and Clubs. Due to its compact design and the light weight, the machine can also be assembled for mobile uses. The Viper S is characterised by a low power and fluid consumption but a powerful output. Thus, the operating costs are low and the Viper S coincidental is energy saving without cutting back the output. Equipped with all features and the usual reliability of the whole Viper range, the Viper S is an inexpensive alternative to bigger machines.

FEATURES

• Control panel – The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.
• Finest adjustments of the output – Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog cloud to the thickest fog can be produced. This enables the Viper NT to be used in both small and large locations.
• DMX 512 as standard – The connection is done with 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The address remains saved also when the machine is unplugged.
• The machine can also be controlled with analog (0 – 10V) via a lighting desk or a XLR-remote (option). The connection is done with 3-pin-XLR-plug.
• A Stand-Alone-Mode is possible as well. The adjustment of the pump is done directly at the machine. Pressing the start button once, the machine starts running with the pre-adjusted pump level.
• A radio remote is also available as an option.
• Internal timer – With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.
• Safety – On the front and the back part of the cover there are fixing points for safety bonds. At both sides of the bottom of the machine are three wholes to which a hanging yoke complete with a collecting tray for fluid drips can be fixed.

FLUID – The following Look-fog fluids are available for the Viper S:

• Quick-Fog (thick, quick disappearing fluid)
• Regular-Fog (thick, long lasting fluid)
• Slow-Fog (thick, extremly long lasting fluid)

SPECIFICATIONS

• Power requirement: 650 Watt
• Voltage: 120V/60Hz
• Warm up time: approx. 7 min.
• Fluid consumption
  • at max. output: 60 ml/min. (2 oz.)
  • at continuous output: 15 ml/min. (0.5 oz)
• Fluid tank capacity: 750 ml
• Fog output: adjustable in 99 steps
• Output projection: max. 8 m (26.2 ft.)
• Fogging time:
  • at 100% output: approx. 35 seconds 
  • at < 50% output: continuous output
• Control
  • DMX 512
  • 0 - 10 V analog
  • Stand-alone-Mode
  • Internal timer
  • Radio remote (Option)
• Temperature control: Microprocessor controlled
• Overheating protection: Heater block/Thermostat, Pump/Thermal switch
• Dimensions L x W x H: 13.7 x 7.1 x 7.5 in. (35 x 18 x 19 cm)
• Weight without bottle: approx. 11.9 lbs. (5.4 kg)
• Shipping Dimensions: 25 x 15 14 in.
• Shipping Weight: 23 lbs