Look Solutions
Look Solutions Viper NT Fog Machine
- MPN:
- VI-0194
- Availability:
- This item is shipped directly from the vendor and is subject to their availability.
Description
The Viper NT is a 1300 watt fog machine. This model is the most frequently used of all Look Solutions fog machines, due to its impressive output, no maintenance, and reliability. It can generate full output fog for 40 seconds, or run continuously at a reduced output level. The Viper NT includes a digital timer, digital stand-alone controls, and a 5-pin DMX interface. It is available in 120V and 230V versions and comes with a 5 liter bottle of Regular Fog fluid..
FEATURES
- Control panel – The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.
- Finest adjustments of the output – Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 – 99%. Thus, any desired effect from a tiny fog cloud to the thickest fog can be produced. This enables the Viper NT to be used in both small and large locations.
- The machine can also be controlled with analog (0 – 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR- plugs.
- A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary.
- Internal timer – With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.
- Safety – On the front and the back part of the cover there are fixing points for safety bonds. At both sides of the bottom of the machine are three wholes to which a hanging yoke complete with a collecting tray for fluid drips can be fixed.
FLUID – The following Look-fog fluids are available for the Viper NT:
- Quick-Fog (thick, quick disappearing fluid)
- Regular-Fog (thick, long lasting fluid)
- Slow-Fog (thick, extremly long lasting fluid)
SPECIFICATIONS
- Power requirement: 1300 Watt
- Voltage: 120V/60Hz
- Warm up time: approx. 7 min.
- Fluid consumption
- at max. output: 120 ml/min.
- at continuous output: 35 ml/min.
- Fluid tank capacity: 5 liter
- Fog output: adjustable in 99 steps
- Output projection: max. 15 m
- Fogging time at < 50% output: continuous output
- Control
- DMX 512
- 0 - 10 V analog
- Stand-alone-Mode
- Radio remote (Option)
- Temperature control: Microprocessor controlled
- Overheating protection: Heater block/Thermostat Pump/Thermal switch
- Dimensions L x W x H: 15.5 x 9 x 9.5 in. (47 x 23 x 24 cm)
- Weight without bottle: approx. 19 lbs. (8.6 kg)
- Shipping Dimensions: 25 x 15 14 in.
- Shipping Weight: 35 lbs