Pro Intercom

The BP1 portable headset station may be worn on the belt, hung on the wall by its sturdy belt-clip or set on top of a console where the soft plastic strips on its underside keep it in place. The...

The BP2 is actually 2 BP1s in the same enclosure. The A and B circuits operate independently of one another and may be used simultaneously. Only the headset amplifier is shared so both circuits can...

The Pro Intercom Blazon 180 incorporates a front-mounted rectangular xenon lamp to limit the visibility of the flashes to 180°. Blazon 180 is triggered by the same voltage which lights the normal...

The Pro Intercom Blazon3 provides the combination of a xenon lamp with an audible annunciator. Whenever any signal lamp button on any station in the same circuit is pressed, the Blazon3 will be...

Pro Intercom Blazon4 is triggered by the same voltage which lights the normal signal lamps in the intercom system. Whenever any signal lamp button on any station in the same circuit is pressed, the...

The Pro Intercom DMH220 Communications Headset is an industry favorite. The Pro Intercom Head Set DMH 220 Super-Rugged Series Dual Muff Communications Headset with Dynamic Mic. The DMH220 has a...

Dual Muff Economical Communications Headset with Dynamic MicSMH310 and DMH320 headsets are known as light, comfortable headsets equipped with high quality transducers for smooth response and pleasant...

Power cable for PS4 Power Supply for Econom systems. AD2410 AC/DC Adaptor, UL ®/CSA ®/TUV/CE approved 24VDC.

The HH10A consists of the hand set with push-to-talk switch, equipped with a US-made coil cord and 4-pin XLR connector, and a wall mount cradle with retaining spring-clip.The HH10B consists of the...

The HH10A consists of the handset with a push-to-talk switch, equipped with a US-made coil cord and 4-pin XLR connector, and a wall-mount cradle with retaining spring-clip.The HH10B consists of the...

Miniature Headset Station (Beltpack) with XLR Adapter Cable Pro Intercom has been asked many times for a lighter, smaller belt pack. Their response is the BP.15 belt pack. They're retained the...

Pro Intercom PS100 Portable Single-Channel Power Supply FEATURES Single circuit power supply Provides power for up to 10 beltpacks Three XLR connectors wired so all connected are in contact...

The Pro Intercom Head Set SMH 210 Super-Rugged Series Single Muff Communications Headset with Dynamic Mic. The SMH210 has a exceptionally high-quality transducers providing wide smooth frequency...

Replacement Cushion/Foam Parts Kit for Pro Intercom's SMH710 Headset.

Performance: These light, comfortable headsets are equipped with high quality transducers for smooth response and pleasant listening. The soft, textured muffs are removable and washable. The...

All lightweight headsets are more fragile than their full-sized counterparts, but the SMH710 is definitely not disposable. It is repairable and the muff is replaceable. The audio quality permits...

Pro Intercom LS3 Talkback Loudspeaker Stations are unique to the industry and packed with special features and capabilities. The LS3 series Talkback Loudspeaker Station operates in three different...

Used – Good: The item is in good condition and is fully-functional but shows signs of wear from use. It may have markings and minor cosmetic damage. NOTE: Example photos of one unit. The...

The BP2 is actually 2 BP1s in the same enclosure. The A and B circuits operate independently of one another and may be used simultaneously. Only the headset amplifier is shared so both circuits can...

Used – Acceptable: The item was removed from a working system. It is still functional but bears signs of wear such as scratches, dents, worn corners, or identifying markings. Missing ear muff...

Used – Acceptable: The item is still functional in that, it still powers on. We are unable to verify any further functionality. Bears signs of wear such as scratches, dents, worn corners, or...

Used – Fair: The item is still functional but is fairly worn. Bears signs of wear such as scratches, dents, worn corners, or identifying markings. Unit 1: The mic arm is broken where it joins...