Shure

Shure ANI4OUT-BLOCK Audio Network Interface

Write a Review
MPN:
ANI4OUT-BLOCK
Condition:
Used
Availability:
Usually ships within 2 business days when in stock.
  • Shure ANI4OUT-BLOCK Audio Network Interface
  • Shure ANI4OUT-BLOCK Audio Network Interface with 3-pin block connectors
  • Shure ANI4OUT-BLOCK Audio Network Interface front
  • Shure ANI4OUT-BLOCK Audio Network Interface side 1
  • Shure ANI4OUT-BLOCK Audio Network Interface back
  • Shure ANI4OUT-BLOCK Audio Network Interface back low
  • Shure ANI4OUT-BLOCK Audio Network Interface side 2
  • Shure ANI4OUT-BLOCK Audio Network Interface bottom
  • Shure ANI4OUT-BLOCK Audio Network Interface 3-pin block connectors
$422.50

Description

Used – Good: The item was removed from a working system and is in good condition. It has slight markings and minor cosmetic damage. It will arrive repackaged. It may be missing parts, accessories, or instructions.

The Shure Audio network interface converts Dante™ digital audio signal to four discrete line / mic analog signals for easy audio routing and convenient browser-based remote control.

FEATURES

  • Single Ethernet port carries Dante audio, power (PoE – class 0)
  • LEDs indicate device status and audio signal
  • Control strings for third-party preset controllers including Crestron® and AMX®
  • 4 Band C/S PEQ on every channel
  • Provides channel summing to combine Dante™ signals from the network and send them over a single analog output
  • Browser-based software control for all device parameters, per output channel:
    • Mute control
    • Digital gain
    • Polarity control
  • 1/3 Rack unit wide
  • Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs

SPECIFICATIONS

GENERAL

  • Input: (1) RJ45
  • Outputs: (4) 3-pin block connector
  • Configuration: Impedance Balanced
  • Polarity: Non-inverting, any input to any output
  • Power Requirements: Power over Ethernet (PoE), Class 0
  • Power Consumption: 10W, maximum
  • Dimensions H x W x D: 1.6 x 5.5 x 5.0 in. (4 x 14 x 12.8 cm)
  • Weight: 1.5 lbs (663 g)
  • Control Application: HTML5 Browser-based
  • Operating Temperature Range: -6.7°C (20°F) to 40°C (104°F)
  • Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)

AUDIO

  • Frequency Response: 20 to 20,000 Hz
  • Input (Dante Digital Audio):
    • Channel Count: 4
    • Sampling Rate: 48 kHz
    • Bit Depth: 24
  • Latency: 0.71 ms (Does not include Dante latency)
  • Dynamic Range (Dante-to-Analog): 20 Hz to 20 kHz, A-weighted, typical, 117 dB
  • Total Harmonic Distortion: @ 1 kHz, -20 dBFS Output, 0 dB analog gain, <0.05%
  • Output Clipping Level:
    • Line: +20 dBV
    • Aux: +0 dBV
    • Mic: -26 dBV
  • Analog Output Level:
    • Selectable: Line 0 dB
    • Aux: - 20 dB
    • Mic: -46 dB
  • Output Impedance: 150 Ω
  • Built-in Digital Signal Processing:
    • Per Channel: Equalizer (4-band Parametric) , Mute, Invert Polarity, Gain ( 140 dB range)
    • System: Audio Summing

NETWORKING

  • Cable Requirements: Cat 5e or higher (shielded cable recommended)
View AllClose