Shure QLXD14 Bodypack Wireless System, G50 Band

Featuring the WA305 instrument cable and QLXD1 wireless bodypack transmitter, QLXD14 combines professional features with simplified setup and operation.

QLX-D® delivers outstanding wireless functionality ideal for mid-size events and installations in businesses, hotels, and government offices with conferencing spaces; schools, houses of worship, and live performance spaces.

WHAT'S INCLUDED

• (1) QLXD1 Bodypack Transmitter
• (1) QLXD4 Receiver
• (1) WA305 instrument cable
• (2) AA batteries
• (2) 1/2 wave antennas
• (2) 2 BNC cables
• (1) zipper bag
• (2) BNC bulkhead Adapters
• (1) rackmount kit
• (1) user guide
• (1) power supply

SPECIFICATIONS

• Tuning Bandwidth: G50 (470 to 534 MHz)
• Working Range: 100 m ( 328 ft)
  • Note: Actual range depends on RF signal absorption, reflection and interference.
• RF Tuning Step Size: 25 kHz, varies by region
• Image Rejection: >70 dB, typical
• RF Sensitivity: -97 dBm at 10-5 BER
• Latency: <2.9 ms
• Audio Frequency Response: 20 – 20 kHz (±1 dB)
• Audio Dynamic Range: System Gain @ +10, >120 dB, A-weighted, typical
• Total Harmonic Distortion: −12 dBFS input, System Gain @ +10, <0.1%
• System Audio Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.
• Operating Temperature Range: -18°C (0°F) to 50°C (122°F)
  • Note: Battery characteristics may limit this range.
• Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
  • Note: Battery characteristics may limit this range.

QLXD4

• Dimensions (H x W x D): 1.63 x 7.75 x 5.94 in. (41 x 197 x 151 mm )
• Weight: 1.71 lbs (777 g), without antennas
• Housing: steel
• Power Requirements: 12 V DC @ 0.4 A, supplied by external power supply (tip positive)
• RF Input:
  • Spurious Rejection: >80 dB, typical
  • Connector Type: BNC
  • Impedance: 50 Ω
• Audio Output: 
  • Gain Adjustment Range: -18 to +42 dB in 1 dB steps
• Configuration:
  • 1/4" (6.35 mm): Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground)
  • XLR balanced (1=ground, 2=audio +, 3=audio −)
• Impedance:
  • 1/4" (6.35 mm): 100 Ω (50 Ω Unbalanced)
  • XLR: 100 Ω
• Full Scale Output:
  • 1/4" (6.35 mm): +12 dBV
  • XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
• Mic/Line Switch: 30 dB pad
• Phantom Power Protection:
  • 1/4" (6.35 mm): yes
  • XLR: yes
• Networking:
  • Network Interface: Single Port Ethernet 10/100 Mbps
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Cable Length: 328 ft (100 m)

QLXD1

• Mic Offset Range: 0 to 21 dB (in 3 dB steps)
• Battery Type: Shure SB900B Rechargeable Li-Ion or AA batteries 1.5 V
• Dimensions (H x W x D): 3.38 x 2.57 x 0.92 in. (86 x 65 x 23 mm), without antenna
• Weight: 4.9 oz (138 g), without batteries
• Housing: Cast aluminum
• Audio Input:
  • Connector: 4-Pin male mini connector (TA4M), See drawing for details
  • Configuration: Unbalanced
  • Impedance: 1 MΩ, See drawing for details
  • Maximum Input Level: 1 kHz at 1% THD, 8.5 dBV ( 7.5 Vpp)
  • Preamplifier Equivalent Input Noise (EIN): System Gain Setting ≥ +20, -120 dBV, A-weighted, typical
• RF Output:
  • Connector: SMA
  • Antenna Type: 1/4 wave
  • Impedance: 50 Ω
  • Occupied Bandwidth: <200 kHz
  • Modulation Type: Shure proprietary digital
  • Power: 1 mW or 10 mW
• See Frequency Range and Output Power table, varies by region