Telex

Telex/AudioCom SPS-2001 Intercom Power Supply NEW!

Write a Review
MPN:
SPS-2001
Condition:
New
Availability:
Usually ships within 2 business days when in stock.
  • Telex/AudioCom SPS-2001 Power Supply
  • Telex/AudioCom SPS-2001 Intercom Power Supply NEW!
  • Telex/AudioCom SPS-2001 Power Supply line drawing
$520.00

Description

Used – New or Open Box: The item is in perfect working condition with intact original packaging and in good condition with minor damage possible, with or without original protective wrapping.

The SPS-2001 is a versatile power supply that can be used in a variety of Telex Audiocom intercom system applications. It is ideal for applications where it is desirable to use a master station with a panel mic / speaker combination.

The SPS-2001 directly accepts any AC input power from 100 to 240 VAC, 50/60 Hz, and it can be configured to power two separate intercom channels or one large intercom channel with twice the intercom station capacity. Additionally, the SPS-2001 can be configured for compatibility with Clear-Com Intercom Systems.

The SPS-2001 can be rack mounted or used on a desktop. For rack mounting, optional hardware is required. For desktop use, four non-marring rubber feet are supplied.

FEATURES

Speaker Inputs and Volume Control

  • Two audio inputs are provided. The inputs are combined internally and sent as a monaural signal to the internal speaker amplifier. The volume control adjusts the level to the front panel speaker. Typically, these inputs are used with the speaker outputs of a master station when the master station is set for use with a panel mic and speaker instead of a headset.

Combine/Isolate Switch

  • This recessed push-button switch lets you combine the audio signals of the two channels to create a single audio channel where all users can intercommunicate. Or, you can isolate each channel to create two groups of completely independent users.

Channel Status Indicators And Reset Push-Button

  • The indicators are green for normal operation and red when there is an overload or short circuit. The reset push-button restores normal operation after the short-circuit or overload has been located and fixed.

Universal AC Power Input

  • The SPS-2001 accepts any input power in the range of 100- 240 VAC, 50/60 Hz.

Intercom Channel Connectors

  • When the Combine/Isolate switch is set to the Isolate position, each channel connector is powered separately and has completely separate intercom audio. When the Combine/Isolate switch is set to the combine position, each channel is still powered separately, but the audio signals are combined so that all users on both channels can intercommunicate.

Telex Audiocom / Clear-Com Selector Switch

  • This selector switch sets the SPS-2001 for compatibility with either Telex Audiocom (BALANCED) or Clear-Com (UNBALANCED). Compatibility includes channel connector pin-outs, channel power requirements, and call signaling requirements. The SPS-2001 is shipped with this switch in the Telex Audiocom position.

Instantaneous Auto-Reset

  • Instantaneous Auto Reset (IAR), the newest technology in performance and safety, which uses a revolutionary new circuitry that dynamically monitors line fault conditions. Then, when the fault is removed, automatically brings individual power supply channels up.

Clear-Com Compatible

SPECIFICAITONS

GENERAL

  • Input Power Requirements: 100 to 240 VAC, 50 / 60 Hz
  • Output Power (each channel): 21 ± 1 VDC, 1A
  • Dimensions: 1.75” (44.5 mm) high, 8.25” (209.5 mm) wide, 10.31” (261.9 mm) deep
  • Weight: approximately 2.5 lb (1.13 kg) Environmental Requirements
  • Storage: -20°C to 80°C; 0% to 95% humidity, non-condensing
  • Operating: 0°C to 50°C; 0% to 95% humidity, non-condensing

INTERCOM CHANNELS

  • Connector Type: One XLR-3M audio connector for each channel. Pinout depends on setting of internal switch S200 for balanced or unbalanced operation as defined below.

Balanced Mode

  • Line Terminating Impedance: 300 ohms ± 10% Connector Pin-out
  • Pin 1 Common (audio and DC return)
  • Pin 2 Full-duplex, balanced intercom audio and +24 VDC output
  • Pin 3 Full-duplex, balanced intercom audio and +24 VDC output

Unbalanced Mode

  • Line Terminating Impedance: 150 ohms ± 5% Connector Pin-out
  • Pin 1 Common (audio and DC return)
  • Pin 2 +24 VDC output
  • Pin 3 Full-duplex, unbalanced Intercom audio high

Speaker Inputs

  • Type: RCA Phone Jack
  • Tip: Speaker + input
  • Sleeve: Speaker - input

Approvals

  • UL, CUL, CE
  • MPN: Catalog Number: 90007699000
View AllClose