ETC
ETC Dual 15A Relay Module
- MPN:
- 7083A1184
- Availability:
- This item is shipped directly from the vendor and is subject to their availability.
- Dimming:
- modules
Description
The ETC R15 Relay Module is a dual, plug-in mechanical relay assembly specifically for use in the Unison Dimming Series rack enclosures. Each Relay Module provides two electrically held relays, in the same form factor as standard dimmer modules. This enables designers to mix and match dimmer and relays for control of diverse loads. Ideal for control of non-dimmable load types such as HID lamps.
True air-gap relay modules ensure that switched power is just that – switched on or off . Relay modules are the perfect choice for moving light or LED circuits which will never need dimming. ETC’s relay modules support any switch load, including motor loads.
APPLICATIONS
- Designed for use in Unison 100-120V Unison DRd rack enclosures
- High Intensity Discharge ballasts (Metal Halide and High Pressure Sodium)
- Non-dimmed On/Off loads
- Motors
- Power for fans and standard outlets
- Moving lights, fog machines and other powered effects
FEATURES
- Two 1.8kW or 2.4kW circuits per module
- Level-activated mechanical relays
- High-density modular assembly
- Die-cast aluminum chassis
- Fully magnetic circuit breakers
GENERAL
- Dual density, plug in assembly, for use in Unison Dimming Series rack enclosures
- UL and cUL Listed for continuous duty at 100% of rated load
- R15 1.8kW
- R20 2.4kW
PHYSICAL
- Modular plug-in assemblies
- Cast aluminum chassis, finished with textured epoxy paint
CIRCUIT BREAKERS
- Fully magnetic to eliminate nuisance tripping
- 20x inrush current rating
- 125%, 10-120 seconds, must-trip rating
- Rated for 100% switching duty applications
ELECTRICAL RATINGS
- 100,A Short Circuit Current Rating (SCCR)
- Modules withstand hot-patching of cold loads up to full rating
- UL and cUL LISTED
RELAYS
- 15 or 20 amp, level-activated mechanical relay
- Rated for 200, full load activation
- Rated for 5 million no load activation
- R15 rated for 0.75HP at 13.8A
- R20 rated for 1.50HP at 20.0A
- Rated for 20A General Purpose, 10A Tungsten and 1.5 HP Motor Maximum
POWER DEVICE
- Sealed, patented assembly
- 4V isolation between control and power components
- Integral bonded heat shrink
- Dimensions: 4.9" x 11.8" x 1.5"
- Weight: 2.6 lb.
- Model: R15
Related Products
ETC Dual 20A Relay Module for Sensor & Unison Dimming
ETC
$580.00
The ETC R20 Relay Module is a dual, plug-in mechanical relay assembly for use in both Sensor and Unison Dimming Series modular dimmer rack enclosures. Each relay module provides two electrically held...
ETC D20 Dual 20A 2.4K Dimmer Module
ETC
$580.00
The Standard Dimmer Module is designed for use in both Sensor+ and Unison Dimming Series modular rack enclosures. Standard Dimmer Modules provide cost-effective digital forward phase angle dimming...
Used ETC D20 Dual 2.4k Dimmer Module
ETC
$135.00
Used ETC D20 Dual 2.4k Dimmer Module. All are working and in good condition.
ETC D20E Enhanced Dual 20A 2.4K Dimmer Module
ETC
$632.00
The ETC Enhanced Dimmer Module is designed for use in both Sensor+ and Unison Dimming Series modular rack enclosures. Enhanced Dimmer Modules provide cost-effective digital forward phase angle...
ETC ColorSource Relay DMX
ETC
$296.00
ColorSource Relay combines power sequencing and data distribution in a portable plug-and-play format. Available with a hardwired DMX input, the ColorSource Relay is ready to go with no...
ETC ColorSource Relay with Multiverse Wireless Receiver
ETC
$484.00
The ETC ColorSource Relay combines power sequencing and data distribution in a portable plug-and-play format. Available with the City Theatrical Multiverse® wireless DMX technology, the ColorSource...
ETC ColorSource Relay Universal Yoke Mount Kit
ETC
$19.20
The ETC CSR-YM is a hardware kit that allows the ETC ColorSource Relays to be mounted to any ETC fixture yoke. NOTE: ColorSource Relay models and fixture are not included.
ETC Dual 20A Constant CB CC20
ETC
$260.00
The Constant Current Module is a dual, plug-in assembly for use in Unison Dimming Series enclosures. The Constant Current module distributes power with overcurrent protection from the dimmer rack...