ETC

ETC D20E Enhanced Dual 20A 2.4K Dimmer Module

Write a Review
MPN:
7050A1031
Availability:
Usually ships within 2 business days when in stock.
Dimming:
modules
  • ETC D20E Enhanced Dual 20A 2.4K Dimmer Module
  • ETC D20E Enhanced Dual 20A 2.4K Dimmer Module
$632.00

Out of stock

Description

The ETC Enhanced Dimmer Module is designed for use in both Sensor+ and Unison Dimming Series modular rack enclosures. Enhanced Dimmer Modules provide cost-effective digital forward phase angle dimming for standard loads such as incandescent, low voltage, quartz, neon, cold-cathode and 2 and 4-wire fluorescent ballasts. The patented, high-density, dual modules feature modular installation and removal, fully magnetic circuit breakers and standard or enhanced risetime toroidal filters.

The Enhanced Dimmer Module has a higher filtering rate to screen out noise. The Enhanced module has a filtering rate of 500µS. (Comparted to the ETC Standard D20 Dimmer module with a filtering rate of 350µS.)

APPLICATIONS

  • Incandescent lighting
  • Low voltage lighting
  • Quartz lighting
  • Neon lighting
  • Cold Cathode lighting
  • 2-wire Fluorescent ballast
  • 4-wire Fluorescent ballast

FEATURES

  • Two 1.8 or 2.4kW dimmers per module
  • Standard or Enhanced risetime toroidal filters
  • High-density modular assembly
  • Die-cast aluminum chassis
  • Fully magnetic circuit breakers

SPECIFICATIONS

Model: D20E

100,000A Short Circuit Current Rating (SCCR)

PHYSICAL

  • Universal dimmer modules are dual, plug-in modules, for use in DR series dimming racks
  • Cast aluminum chassis, finished with textured epoxy paint
  • Keyed to prevent insertion in inappropriately rated rack positions

CIRCUIT BREAKERS

  • Fully magnetic to eliminate nuisance tripping
  • Fault Current Rating:
    • 10,000 AIC rating — 100-120 Volt
    • 14,000 AIC rating — 277 Volt

ELECTRICAL

  • Module rating: 20 amp

RATINGS

  • Modules shall withstand hot-patching of cold incandescent loads up to the module's full rating, without tripping

SCR ASSEMBLY

  • Sealed, patented assembly
  • Field replaceable with screwdriver
  • Two back-to-back SCRs per circuit
  • One control LED per circuit
  • 4000V isolation between control and power components
  • Integral bonded heatsink
  • Integral temperature sensor

FILTERING

  • 500µS - Enhanced 100-120V modules

DIMMER RANGE

  • Incandescent, low voltage dimming range 100-0%
  • Dimming range of 2 and 4-wire fluorescent ballast is dependent on lamp ballast combination

APPROVALS

  • UL and cUL LISTED
View AllClose