Look Solutions Cryo-Fog HP 1700W Low Fog Machine

The Look Solutions Cryo-Fog HP is a powerful low fog machine. It has the option of either 2200W of output at 220V or 1700W of output at 110V.

The Cryo-Fog HP is a fog generator, a fan and a cooling chamber built into a compact flightcase (67 x 51 x 30 cm) with space next to the fog generator to held a 5L can of fluid. Liquid CO2 is used to cool down the fog of the inbuilt low temperature fog generator. Therefore the machine produce thick low fog which distributes evenly. The machine is powerful enough to fill even big stages with low fog within a short time. The liquid CO2 is delivered from a low pressure tank (20 - 24 bar), which is connected to the machine via a hose. The intelligent technology ensures sure that the fogging process will not start before the cooling chamber has reached the right temperature. As a result, no "warm" fog - which will go upwards - can escape from the machine.

The Cryo-Fog benefits from its compact size, the low weight, the powerful output, the low noise and the easy operation.

HIGHLIGHTS

The Cryo-Fog can be controlled via DMX 512. The machine uses three channels on the desk. So, the pump, the fan and also the CO2-valve can be adjusted separately.

If the Cryo-Fog is controlled via DMX, the machine can also be used as a "normal" fog generator. The DMX start address can be adjusted and saved via the control panel. The machine can also be controlled with analogue (0 - 10 V) via a lighting desk or via XLR-remote (option). The fogging process starts automatically as soon as the cooling chamber has reached the right temperature. A stand-alone-mode is also possible. The adjustment of the pump is done directly at the machine. The fan runs automatically. A short press at the start button makes the machine run and the fogging process start as soon as the cooling chamber has reached the right temperature. Therefore to keep the start button pressed permanently is unnecessary.

The control panel with LED-display has simple symbols to allow for easy operation. It also protects the control buttons against dirt.

Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the Cryo-Fog to be used in both small and large locations.

NOTE: This machine has been designed to be used with original Look Solutions CRYO-FOG-fluid. Use of other liquids will void the manufacturer's warranty and can be dangerous to your health. Never use cleaner or fragrances with this machine!

FEATURES

• Fog generator, fan and cooling chamber built into a compact flightcase
• DMX 512 as standard, analogue (0 - 10 V) and stand-alone-mode
• Output adjustable in steps of 1%
• Pump, fan and cooling adjustable seperately when controlled via DMX, therefore high flexibility
• Can be used as a normal fog machine if controlled via DMX
• Fogging process starts only if the cooling chamber is cold enough
• Powerful output
• Continuous output
• Made in Germany

OPTIONAL ACCESSORIES

• XLR-Remote for analogue control, Hose