NuDelta LED Tape Tester

The NuDelta LED Tape Tester allows you to test that tape before you install it! Works on any LED tape or module that is directly controlled. Does not work with pixel tape. Measures voltage going in, measures current going out. Four dimmer channels. 12-24 Volts DC Up to 10 Amps....that's a lot of light!!

FEATURES

• Test RGB or RGBW LED tape
• Test any 12 to 24 volt LED module
• Manually control LEDs for film, television, theatre or photography.
• Use as a demonstration tool for classrooms.
• Test automotive or aviation LED modules.
• Make sure the LEDs work before you install them.
• Measure the voltage of your power supply.
• Measure the current consumption of your LEDs.
• Test the color or brightness to make sure it works for your application.

MORE FEATURES

• Safety First! – Includes an optional corner attachment ring for a safety tether. Use it whenever the LTT1 is being used overhead.
• Removable connectors – Connect bare wire or use our wiring clips
• Extra connector included – Comes with alligator clips for quickly connecting to bare wires. Also includes an extra connector if you have a favorite led tape or module connector you use often.
• Power input options – Comes with a standard 5.5 millimeter connector on one end and removable wiring terminal on the other.
• New Test Connectors – Currently shipping the LTT1 with new Wago Lever Lock connectors. They allow quick temporary attachment of the tester to bare wires without the risk of short circuiting.
• Can be battery powered – With a tool battery and adapter, you can power the LTT1 for convenient use on location.

SPECIFICATIONS

• Sturdy steel enclosure
• Sturdy steel enclosure
• Power input: 5.5 millimeter connector on one end and removable wiring terminal on the other
• Includes alligator clips, extra connector, and carrying case
• Made in the USA

NOTE: Does not work with pixel tape.

NOTE: Power supply, battery, adapter, cable, and LED tape not included.