Networking and DMX Devices

The Obsidian Control Systems NETRON EP1 is a compact Ethernet to DMX gateway with a single RDM compatible port designed for single gang wall mount, truss mount and standalone installations. It is configurable via the integrated OLED display and encoder,...

The Obsidian Netron RDM6 IP is a six port DMX/RDM splitter in a rugged IP66 rated chassis. It is designed for live productions, movie sets, temporary outdoor installations, or interior use with long term protection from humidity, dust and debris...

The Obsidian Netron RDM6D is a powerful DIN Rail or Wall Mount DMX/RDM splitter with six wire terminal or RJ45 outputs. Designed with rugged, opto-isolated outputs it is the ideal device for permanent installations requiring a compact design and flexible...

The Obsidian Netron EN6D is a powerful DIN Rail or Wall Mount Ethernet to DMX gateway with six RDM compatible wire terminal or RJ45 outputs. Easy to configure with a range of integrated presets plus a wide array of advanced merge and routing features it...

The Obsidian Netron EN6D is a powerful DIN Rail or Wall Mount Ethernet to DMX gateway with six RDM compatible wire terminal or RJ45 outputs. Easy to configure with a range of integrated presets plus a wide array of advanced merge and routing features it...

The NETRON NS8 IP is an IP66 rated rugged outdoor network switch featuring 8 Gigabit ports and PoE+ support. With a total power budget of 100W the NS8 IP is ideally suited to distribute data and power to NETRON nodes or any other PoE compatible network...

The Obsidian NETRON NS8 is a compact network switch featuring 8 Gigabit ports and PoE+ support. With a total power budget of 100W the NS8 is ideally suited to distribute data and power to NETRON nodes or any other PoE compatible network appliance. Highly...

The Obsidian Control Systems Netron EN12i is a powerful high-density Art-Net and sACN to DMX gateway with twelve RDM compatible wire terminal or RJ45 outputs. Easy to configure with a range of integrated presets plus a wide array of advanced merge and...

The ETC Response 0-10V Gateway accepts sACN or DMX control input and provides 24 channels of 0-10V sink control. It is ideal for both retrofit and new power-control system installations that use four-wire LED drivers and fluorescent ballasts. The Gateway...

Luna is the essential flex unit that gets the job done, being able to transmit or receive one universe of DMX. Featuring the same reliable CRMX as all other devices from LumenRadio it also features Bluetooth connectivity in a compact and rugged format...

Pathport, Rack-mount, 4-Ports, XLR 5-Pin Female, Rear Panel Connectors (old MPN 6321). The Pathport® series of DMX/RDM Ethernet Gateways are the heart of DMX distribution. Connect DMX512 control devices and send data over an Ethernet network to...

The ETC PS450 is a replacement power supply with connector for ETC ColorSource consoles, US plug only. DETAILS Model: I.T.E Power Supply MPN: PS-450 Input: 100-240V AC, 50-60Hz, 1.5 A Output:12 Vdc, 5A IP Rating: IP22 (indoor location)

ENTTEC’s STORM10 is a compact installer-grade Ethernet-DMX to DMX/RDM gateway designed to make controlling DMX lights over Ethernet simple. The STORM10 converts Art-Net, sACN & ESP eDMX protocols into up to 10 Universes of DMX/RDM to your lighting...

What do we need to control real devices? DMX outputs! This is where the grandMA3 onPC xPort Nodes come into play. The nodes fulfill two different tasks: They convert Ethernet data to DMX and they can add parameters to your grandMA3 onPC system. So just...

The Response Show Control Gateway is portable device that lets your Eos family console communicate with MIDI or other third party devices. The Response MIDI Gateway can send and receive info in all flavors of MIDI: Note, Show Control (MSC), and Time Code...

ETC’s Response Mk2 Two-Port Gateway provides data distribution using the quality and reliability of ETC’s network technology. Built for Net3 using industry-standard sACN, DMX and RDM, the Response Gateway unlocks the power of your networked...

ENTTEC's DIN RDS4 is an installation grade, 4-port, DMX/RDM isolated splitter engineered to take any architectural, commercial or entertainment project to the next level. Use the DIN RDS4 to turn one DMX feed into four and eliminate the need to create...

Enttec's DIN Ethergate is a robust and reliable, installation-grade, Ethernet to DMX converter that has been engineered to connect physical DMX devices to your Ethernet network infrastructure. Now you can expand your network entertainment project to the...

The Preset 10 Ethernet Architectural is a four universe playback device that can record ten snapshots of sACN data. These presets can be recalled with a press of a button. FEATURES  Multiple stations can reside on the same network in either a...

City Theatrical's Multiverse® Transmitter opens a new world in wireless DMX/RDM. Its Ethernet input allows it to take in Streaming ACN (sACN) or Art-Net and to transmit between eight and 10 user-selectable universes of DMX/RDM, depending on the type...

The SnakSys (by ChamSys Lighting) 10Scene Wall Plate features ten 10Scene trigger buttons, with dual colour LED status indication. Connect 10Scene wall plates directly to the QuickQ Rack or to the SnakeSys Gateway interface, where it can then integrate...

The ODE MK3 is a robust, reliable, installation-grade, Ethernet to DMX converter engineered to connect DMX fixtures to your Ethernet network infrastructure. Now you can expand your lighting project to the next level. With two Universes of bi-directional...

The Pathport series of DMX-over-Ethernet Gateways are the heart of DMX distribution. The Pathport Hand Held 1-Port Gateway is ideal for when a small, hand held DMX/RDM Ethernet Gateway is needed, such as touring or rental applications. The Pathport...

The D-Split is an optically-isolated DMX splitter and repeater for DMX512. With one input and four outputs, the D-Split gives you the ultimate flexibility to link up to 32 DMX fixtures. Need more outputs? Simply add more D-Splits to your chain! Instead...

The Enttec D-Split is an optically-isolated DMX splitter and repeater for DMX512. With one input and four outputs, the D-Split gives you the ultimate flexibility to link up to 32 DMX fixtures. Need more outputs? Simply add more D-Splits to your chain!...

The NETRON RJ-T is a compact useful adapter to convert ESTA compliant RJ45 DMX ports to a 3-wire screw terminal. Ideal for installations of NETRON RJ45 products like the RDM645 or the EN12-45 it is also a compatible with any other existing RJ45 DMX...

The DMX Decelerator II is a DMX512 isolator and re-timing device. It can receive any signal within the DMX512 specification and it can accept some signals outside of the specification. It produces a DMX output signal with “relaxed” timing...

The Obsidian Control Systems Netron EN12-45 is a powerful high-density Ethernet to DMX gateway with twelve RDM compatible ports. Easy to configure with a range of integrated presets plus a wide array of advanced merge and routing features it is the ideal...

The Obsidian Control Systems Netron EP2 is a compact Ethernet to DMX gateway with two RDM compatible ports designed for wall mount, truss mount and standalone installations. It is configurable via its internal web remote and powered over Ethernet or via...

The Obisidan Control System DMX10-5 is a rackmount 10-port DMX Splitter with dual inputs and freely assignable 5-pin XLR DMX outputs. Utilizing long life toggle switches every port is routed to either the A or B input, providing flexibility to acco...

The Obisidan Control System DMX10-3 is a rackmount 10-port DMX Splitter with dual inputs and freely assignable 3-pin XLR DMX outputs. Utilizing long life toggle switches every port is routed to either the A or B input, providing flexibility to acco...

The Chauvet Professional ÉPIX Flex Drive controls the ÉPIX Flex 20 with 2 plug and play outputs that drive up to 4 ÉPIX Flex 20 at 960 LEDs each. Adding ÉPIX Flex Boost to each output doubles the capacity of the drive to 1920...

The Chauvet Professional ÉPIX Drive 900 hosts the processing and power supply for the ÉPIX Tour system. It supports either 18 ÉPIX Strip Tours or 6 ÉPIX Bar Tours, or any combination of the two, with a total capacity of 900...

The Chauvet Professional Net-XII is a versatile rack-mountable Ethernet-to-DMX node, which also functions as a merger for two controllers on either Ethernet or DMX inputs. It has the ability to record up to 10 DMX presets, which can be triggered remotely...

The Chauvet Professional Synapse 4 functions as an intelligent relay pack to control the power sent to individual lighting units. Synapse 4 can de-power entire sections of an installation, which prolongs the lifespan of lighting fixtures and decreases...

The Chauvet Professional RDMX Splitter 8 is a versatile RDM and 5-pin DMX opto-splitter with a rugged, durable housing. It features 8 outputs and 2 inputs, so it can instantly go from a 1×8 splitter to a 2×4 splitter for two different...

The Chauvet DJ FlareCON Air 2 is a Compact, 100% TRUE wireless Wi-Fi™ receiver and wireless D-Fi™ transmitter in a single unit. The unit has a built-in battery, generates its own Wi-Fi™ network, and can be used anywhere with no internet...

Recording and playing back DMX programming has never been easier than with Chauvet DJ's DMX-RT4. This robust DMX recording and playback device has 4 independent triggers for playback and each trigger can be programmed and activated separately. Normally...

The Chauvet DJ DMX AN2 is a multi-purpose Art-Net/sACN node that converts 1 Ethernet cable to 2 DMX universes. Its optical and electrical isolation is ready for any situation and the durable Neutrik® etherCON® in/through port ensures reliability...

Discover the amazing transforming transmitter! The Chauvet DJ D-Fi XLR TX transforms conventionally wired DMX set-ups into wireless ones! This battery powered wireless D-Fi transmitter fits in the palm of your hand and provides instant wireless...